79
Basic Operation
8. Within 2.0 nautical miles of the FAF (LYH), the GNS 480 switches
from terminal mode to “approach” mode. CDI scaling is tightened
from either 2° or 1.0 to 0.3 nautical miles, full scale deflection,
whichever is smaller.
9. As you approach the FAF, a waypoint message on the bottom
of the display “RIGHT TO TRK 025°” appears. Make any course
adjustments necessary for the final course segment (FAF to MAP).
10. As you cross the FAF, the destination sequences to the MAP
(“RW04”), the runway threshold). With the needle centered, fly
toward the MAP, observing the altitude minimums dictated by the
approach plate.
11. As you cross the MAP, you will receive an audio message “missed
approach point” unless there is activity on the active Com
frequency.
RW04
DO NOT
USE FOR
NAVIGATION
Procedures
Summary of Contents for Apollo CNX80
