DTK Up
- The Desired Track for the current flight plan leg is the top of the display. The
aircraft symbol is at the bottom of the display and will point towards the direction you
are flying.
Track Up
- The direction that your aircraft is aligned vertically and moving towards is at
the top of the display. The aircraft symbol is at the bottom of the display.
1. In the Map function, turn the
Large
knob to reach the Map Setup page. Press
SEL
.
Turn the
Large
knob to choose Map Orient for selection.
Route Line:On
Map Orient:North
2. Turn the
Small
knob to choose North, DTK, or Track.
3. Press
ENTER
when you made your selection, or turn the
Large
knob to the next item.
Identifier and Waypoint Type Selection
The Identifier & Waypoint Type page allows you to choose the type of waypoint
identifiers that will be displayed. You may control the look of your map screen for each
type of waypoint by choosing to show the symbol and Identifier, symbol only, or to turn
that type of waypoint “Off.” The symbol for each waypoint type is shown in each
selection. When “Off” is selected, no symbol or identifier will be displayed for that
waypoint type. The “smart” keys always allow to select their waypoint type.
1. In the Map function, turn the
Large
knob to reach the Map Setup page. Turn the
Small
knob to the Identifier & Waypoint Type page. Press
SEL
to start editing the waypoint
types.
APT:¿ID INT:+ID
VOR:ÂID NDB:ÁID
Usr:ÀID
2. Turn the
Large
knob to choose the waypoint type that you want to edit. Turn the
Small
knob to choose symbol and identifier (ID), symbol only, or “Off.” In this
example, the flashing (underlined) selection would show both the symbol and
identifier for intersections.
APT:¿ID INT:+ID
VOR:ÂID NDB:ÁID
Usr:ÀID
3. Turn the
Small
knob to select the combination you want shown on the Map display. In
this example, only the symbol (
+
) will be shown on the Map display.
APT:¿ID INT:+
VOR:ÂID NDB:ÁID
Usr:ÀID
Moving Map Functions
27