with 020° inbound selected as the “OBS” course to
UBG.
Continue
The Continue option is available for the Active flight
plan when the flight plan status is Holding (waypoint
sequencing is not allowed). Pressing
ENTER
when
this option is displayed restarts the Active flight plan
and enables waypoint sequencing.
1. In the Flight Plan function, turn the
LARGE
knob
to display the Name Page.
*Active*
259nm
Dest: Wpt: PDT
Holding
·
2. Press
SEL
. The “Continue?” option will flash.
*Active*
259nm
Dest: Wpt: PDT
Continue?
6-21
Flight Plan Functions
SEL
HIO (NEXT)
UBG (TO)
3S2 (FROM)
Pe
rp
en
dic
ula
r
to
0
2
0
02
0
"TO" Side
"FROM" Side
If sequencing is enabled
on the "TO" side of a line
perpendicular to the
destination waypoint, the
flightplan will sequence to
the "NEXT" waypoint
when you cross the line.
If sequencing is enabled
on the "FROM" side of a
line perpendicular to the
inbound course at the
active destination waypoint,
the flightplan will sequence
immediately to the "NEXT"
waypoint.
Summary of Contents for Apollo GX50
