![background image](http://html.mh-extra.com/html/garmin/approach-g5-gps-enabled-golf-handheld/approach-g5-gps-enabled-golf-handheld_install-manual-and-pilots-manual_565168028.webp)
Garmin G5 Install Manual & Pilot's Guide
190-02072-00 Rev. E
12
Unit Installation
Installation Manual
Pilot's Guide
Appendix
Index
• The GSA 28 contains a 120
Ω
resistor inside the unit that provides termination
when the two CAN-TERM pins are connected together (Figure 1-8).
GARMIN CAN TERMINATOR
Figure 1-7 CAN Bus Termination (011-02887-00) for the G5, GAD 29, GMU 11 and GPS 20A
GSA 28 SERVO
CAN_TERM_1 3
CAN_TERM_2 4
Figure 1-8 CAN Bus Termination for the GSA 28
Both ends of the CAN bus should be terminated (Figure 1-9) and devices that are
not at the ends of the CAN bus should not be terminated (Figure 1-10).
LRU
LRU
CORRECT - CAN BUS TERMINATED AT EACH END OF THE BACKBONE
LRU
LRU
LRU
TERM
TERM
Figure 1-9 Correct CAN Bus Termination Example
Summary of Contents for Approach G5 - GPS-Enabled Golf Handheld
