background image

AQUAMAP™ 10x2/12x2 SERIES

7

Item

Description

1

DC Power supply / battery

2

Power/NMEA 0183 cable

3

NMEA 0183 device

Item

Garmin Wire Color

Garmin Wire Function

NMEA 0183 Device

Wire Function

1

Red

Power

Power

2

Black

Power supply - / ground Power supply - / ground

3

Black

Data ground

Data ground

4

Brown

RXA (+)

TXA (+)

5

Violet

RXB (-)

TXB (-)

6

Blue

TXA (+)

RXA (+)

7

Gray

TXB (-)

RXB (-)

Single-Ended NMEA 0183 Device Connections

Item

Description

1

Power source

2

Power/NMEA 0183 cable

3

NMEA 0183 device

Item

Garmin Wire Color

Garmin Wire Function

NMEA 0183 Device

Wire Function

1

Red

Power

Power

2

Black

Power ground

Power ground

3

Violet

RXB

Not applicable

4

Brown

RXA

TX

5

Blue

TXA

RX

6

Gray

TXB

N/A

• 

If the NMEA 0183 device has only one input (receive, RX) wire (no A, B, +, 

or -), you must leave the TXB wire unconnected.

• 

If the NMEA 0183 device has only one output (transmit, TX) wire (no A, B, 

+, or -), you must connect the RXB wire to ground.

NMEA 0183 Device Connected with a Single Receive Wire

In this example, the NMEA 0183 device is receiving data from the chartplotter.

Item

Description

1

DC Power supply / battery

2

Power/NMEA 0183 cable

3

NMEA 0183 device

Item

Garmin Wire Color

Garmin Wire Function

NMEA 0183 Device 

Wire Function

1

Red

Power

Power

2

Black

Power supply - / ground Power supply - / ground

3

Blue

TXA

RXA

4

Gray

TXB

Not applicable

NMEA 0183 Device Connected with a Single Transmit Wire

In this example, the NMEA 0183 device is sending data to the chartplotter.

Item

Description

1

DC Power supply / battery

2

Power/NMEA 0183 cable

3

NMEA 0183 device

Item

Garmin Wire Color

Garmin Wire Function

NMEA 0183 Device 

Wire Function

1

Red

Power

Power

2

Black

Power ground

Power ground

3

Violet

RXB

Not applicable

4

Brown

RXA

TXA

NMEA 0183 and Power Cable Pinout

Pin 

Wire Color

Wire Function

1

Gray

NMEA TXB

2

Black

Ground / Power supply -

3

Blue

NMEA TXA

4

Brown

NMEA RXA

5

Yellow

Alarm

6

Red

Power

7

Violet

NMEA RXB

8

Orange

Accessory on

Lamp and Horn Connections

The device can be used with a lamp, a horn, or both, to sound or flash an 

alert when the chartplotter displays a message. This is optional, and the alarm 

wire is not necessary for the device to function normally. When connecting the 

device to a lamp or horn, observe these considerations.

•  The alarm circuit switches to a low-voltage state when the alarm sounds.
•  The maximum current is 1 A, and a relay is needed to limit the current from 

the chartplotter to 1 A.

•  To manually toggle visual and audible alerts, you can install single-pole, 

single-throw switches.

Summary of Contents for AQUAMAP 10x2 Series











Reviews: