8
AQUAMAP™ 10x2/12x2 SERIES
Item
Description
1
DC Power supply / battery
2
Power cable
3
Horn
4
Lamp
5
Relay (1 A coil current)
6
Toggle switches to enable and disable lamp or horn alerts
Item
Wire Color
Wire Function
1
Red
Power
2
Black
Power supply - / Ground
3
Yellow
Alarm
HDMI
®
Out Video Considerations
NOTICE
To prevent corrosion due to moisture, you must use Garmin GPSMAP
®
accessory cables when connecting the chartplotter to the video display. Using
different cables voids your warranty.
Through the HDMI OUT port, you can duplicate the chartplotter screen on
another device, such as a television or monitor.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft) long. If you need
a longer cable, you should use an active HDMI cable only. You need an HDMI
coupler to connect the two HDMI cables.
You must make all cable connections in a dry environment.
Item
Description
1
AQUAMAP 10x2/12x2 series MFD
2
GPSMAP HDMI cable (HDMI OUT)
3
Third party display with an HDMI port, such as a monitor or television
4
Dry environment, protected from moisture
Composite Video Considerations
This chartplotter allows video input from composite video sources using the
port labeled CVBS IN. When connecting composite video, you should observe
these considerations.
•
The CVBS IN port uses a BNC connector. You can use a BNC to RCA
adapter to connect a composite-video source with RCA connectors to the
CVBS IN port.
•
Video is shared across the Garmin Marine Network, but it is not shared
across the NMEA 2000 network.
Specifications
Device
Specification
Measurement
AQUAMAP
10x2 series
Dimensions (W x H x D)
318 x 185 x 69 mm
(12
1
/
2
x 7
5
/
16
x 2
11
/
16
in.)
Weight
4.1 lbs (1.85 kg)
Display size (W x H)
224 x 125 mm (8
3
/
4
x 4
15
/
16
in.)
Display type
WSVGA
Display resolution
1024 x 600 pixels
Max. power usage at 10 Vdc
32.4 W
Typical current draw at 12 Vdc 1.9 A
Max. current draw at 12 Vdc
2.7 A
AQUAMAP
12x2 series
Dimensions (W x H x D)
359 x 227 x 69 mm
(14
1
/
8
x 8
5
/
16
x 2
11
/
16
in.)
Weight
2.34 kg (5.2 lbs)
Display size (W x H)
262 x 164 mm (10
5
/
16
x 6
7
/
16
in.)
Display type
WXGA
Display resolution
1280 x 800 pixels
Max. power usage at 10 Vdc
34.8 W
Typical current draw at 12 Vdc 2.2 A
Max. current draw at 12 Vdc
2.9 A
Sonar
models
Frequencies*
Traditional: 50/77/83/200 kHz
Single Channel CHIRP: 40 to 240 kHz
Garmin ClearVü CHIRP:
260/455/800 kHz
Transmit power (RMS)**
Traditional 50/77/200 kHz sonar: 2 kW
CHIRP: 1 kW
Garmin ClearVü and SideVü CHIRP:
500 W
Depth***
5,000 ft at 2 kW
All models
Temperature range
-15° to 50°C (5° to 122°F)
Material
Polycarbonate plastic and die-cast
aluminum
Water rating****
IEC 60529 IPX7
Fuse
8 A, 125 V fast-acting
Input power
10 to 32 Vdc
Memory card
2 SD
®
card slots; 32 GB max. storage
Max. waypoints
5,000
Max. routes
100
Max. active track points
50,000 points, 50 saved tracks
Compass-safe distance
65 cm (25.5 in.)
NMEA 2000 LEN
2
NMEA 2000 draw
75 mA max.
* Dependent upon transducer.
**Dependent upon transducer rating and depth.
***Dependent upon the transducer, water salinity, bottom type, and other
water conditions.
****The device withstands incidental exposure to water of up to 1 m for up to
30 min. For more information, go to
G
armin.com/waterrating.
Summary of Contents for AQUAMAP 10x2 Series
Page 10: ......
