190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
153
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
The following range items are configurable on the airways menu:
Airway Type
Symbol
Default
Range (nm)
Maximum
Range (nm)
Low Altitude Airway (LOW ALT AIRWAY)
200
500
High Altitude Airway (HI ALT AIRWAY)
300
500
Table 5-4 Airway Range Information
TRACK VECTOR
The Navigation Map can display a track vector that is useful in minimizing track angle error. The track vector
is a dashed light blue line segment with an arrowhead attached to the end, extended to a predicted location
along the current aircraft track. The track vector look-ahead time is selectable (30 sec, 60 sec (default), 2 min,
5 min, 10 min, 20 min) and determines the length of the track vector. The arrowhead is continuously pointing
to the predicted aircraft location.
Figure 5-24 Navigation Map -Track Vector
Track Vector
Displaying/removing the track vector:
1)
Press the
MENU
Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group.
4)
Press the
ENT
Key.
5)
Highlight the ‘TRACK VECTOR’ field.
6)
Select ‘On’ or ‘Off’. Press the
ENT
Key to accept the selected option. The flashing cursor highlights the look
ahead time field. Use the
FMS
Knob to select the desired time. Press the
ENT
Key.
7)
Press the
FMS
Knob to return to the Navigation Map Page.
