190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
26
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Predicting RAIM availability at a selected waypoint
1)
Select the GPS Status Page.
2)
If necessary, press the
RAIM
Softkey.
3)
Press the
FMS
Knob. The ‘WAYPOINT’ field is highlighted.
4)
Turn the small
FMS
Knob to display the Waypoint Information Window.
5)
Enter the desired waypoint:
a)
Use the
FMS
Knob to enter the desired waypoint by identifier, facility, or city name and press the
ENT
Key. Refer
to Section 1.7 for instructions on entering alphanumeric data into the G1000.
Or
:
a)
Turn
the small
FMS
Knob counter-clockwise to display a list of flight plan waypoints (the FPL list is populated
only when navigating a flight plan).
b)
Turn
the small
FMS
Knob clockwise to display the NRST, RECENT, or AIRWAY waypoints, if required.
c)
Turn
the large
FMS
Knob clockwise to select the desired waypoint. The G1000 automatically fills in the identifier,
facility, and city fields with the information for the selected waypoint.
d)
Press the
ENT
Key to accept the waypoint entry.
6)
Use the
FMS
Knob to enter an arrival time and press the
ENT
Key.
7)
Use the
FMS
Knob to enter an arrival date and press the
ENT
Key.
8)
With the cursor highlighting ‘COMPUTE RAIM?’, press the
ENT
Key. Once RAIM availability is computed, one
of the following is displayed:
• ‘COMPUTE RAIM?’—RAIM has not been computed for the current waypoint, time, and date combination
• ‘COMPUTING AVAILABILITY’—RAIM calculation in progress
• ‘RAIM AVAILABLE’—RAIM is predicted to be available for the specified waypoint, time, and date
• ‘RAIM NOT AVAILABLE’—RAIM is predicted to be unavailable for the specified waypoint, time, and date
Predicting RAIM availability at present position
1)
Select the GPS Status Page.
2)
If necessary, press the
RAIM
Softkey.
3)
Press the
FMS
Knob. The ‘WAYPOINT’ field is highlighted.
4)
Press the
MENU
Key.
5)
With ‘Set WPT to Present Position’ highlighted, press the
ENT
Key.
6)
Press the
ENT
Key to accept the waypoint entry.
7)
Use the
FMS
Knob to enter an arrival time and press the
ENT
Key.
8)
Use the
FMS
Knob to enter an arrival date and press the
ENT
Key.
9)
With the cursor highlighting ‘COMPUTE RAIM?’, press the
ENT
Key. Once RAIM availability is computed, one
of the following is displayed:
