Garmin Camper 760, Owner'S Manual

Getting Started

 WARNING

See the 

Important Safety and Product Information

 guide in the 

product box for product warnings and other important 

information.

Connecting the Device to Vehicle Power

 WARNING

This product contains a lithium-ion battery. To prevent the 

possibility of personal injury or product damage caused by 

battery exposure to extreme heat, store the device out of direct 

sunlight.

Before you use your device on battery power, you should 

charge it.

1

Plug the vehicle power cable 

À

 into the USB port on the 

mount.

2

Press the mount 

Á

 onto the suction cup 

Â

 until it snaps into 

place.
The Garmin® logo on the mount should face right-side up.

3

Press the suction cup to the windshield, and flip the lever 

à

back toward the windshield.

4

Fit the tab on the top of the mount into the slot on the back of 

the device.

5

Press the bottom of the mount into the device until it clicks.

6

Plug the other end of the vehicle power cable into a power 

outlet in your vehicle.

Support and Updates

Garmin Express provides easy access to these services for 

your device.
• Product registration
• Software and map updates
• Product manuals
• Vehicles, voices, and other extras

Setting Up Garmin Express

1

Plug the small end of the USB cable into the port on the 

device.

2

Plug the larger end of the USB cable into an available USB 

port on your computer.

3

Go to 

www.garmin.com/express

.

4

Follow the on-screen instructions.

nüMaps Guarantee™

Your device may be eligible for a free map update within 90 

days of first acquiring satellites while driving. Go to 

www.garmin.com/numaps

 for terms and conditions.

Lifetime Subscriptions

Some models include subscriptions to lifetime features. For 

more information, go to 

www.garmin.com/lmt

.

LT

: This model includes a lifetime traffic subscription and a 

traffic receiver.

LM

: This model includes a nüMaps Lifetime™ subscription, 

which provides quarterly map updates for the useful life of 

your device. For terms and conditions go to 

www.garmin.com/us/maps/numaps_lifetime

.

LMT

: This model includes a nüMaps Lifetime subscription, 

lifetime traffic subscription, and a traffic receiver.

LMTHD or LMT-D

: This model includes a nüMaps Lifetime 

subscription, lifetime digital traffic subscription, and a digital 

traffic receiver.

Activating Lifetime Maps

1

Go to 

www.garmin.com/express

.

2

Follow the on-screen instructions.

NOTE: 

If you register the device, you can receive e-mail 

notifications when a map update is available.

Entering and Exiting Sleep Mode

You can use sleep mode to conserve battery power when your 

device is not in use. While in sleep mode, your device uses very 

little power and can wake instantly for use.

TIP: 

You can save power by putting the device in sleep mode 

while charging the battery.

Press the power key 

À

.

Turning Off the Device

1

Hold the power key until a prompt appears on the screen.
The prompt appears after five seconds. If you release the 

power key before the prompt appears, the device enters 

sleep mode.

2

Select 

Off

.

Resetting the Device

You can reset your device if it stops functioning.

Hold the power key for 10 seconds.

Acquiring GPS Signals

To navigate with your device, you must acquire satellites. 

 in 

the status bar indicates the satellite signal strength (see 

page 2

). Acquiring satellites can take several minutes.

1

Turn on the device.

2

If necessary, go outdoors to an open area, away from tall 

buildings and trees.

3

If necessary, hold 

 to view detailed information about the 

satellite signals.

Entering an RV Profile

 WARNING

Entering your vehicle profile characteristics does not guarantee 

that your vehicle's characteristics will be accounted for in all 

Getting Started

1