G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Page 7-53
190-00716-01
Revision 1
11.
Verify on PFD 1 and PFD 2 the ESP Roll Indices are displayed at 45° on the roll indicator on the
Attitude Display.
12.
On the GCU, press the inner FMS knob to activate the cursor then rotate the outer FMS knob to
select the Stability & Protection window on the MFD.
13.
Rotate the inner FMS knob to change the status to “DISABLED”.
14.
Verify that on the MFD SETUP 2 page Stability & Protection window that the status is
“DISABLED”.
15.
Verify on PFD 1 and PFD 2 the ESP Roll Indices are not displayed at 45° on the roll indicator on
the Attitude Display.
16.
Verify on PFD 1 and PFD 2 that there is an “ESP OFF” alert message.
17.
Remove the cover from both GPS1 and GPS2 antennas.
18.
Remove power to the aircraft and avionics systems by placing the aircraft AVIONICS MASTER
PWR and EXP PWR switches to OFF.
19.
Wait ~ 1 minute before re-applying aircraft power.
20.
Apply power to the aircraft and avionics systems by setting the BAT, EXT PWR and AVIONICS
MASTER PWR switches to ON.
21.
During power up and GPS satellite acquisition, verify on PFD1 and PFD2 the ESP Roll Indices
are displayed at 45° on the roll indicator on the Attitude Display.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......
