G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Page 3-35
190-00716-01
Revision 1
3.21 GTX 33/33D Configuration
Do not perform this step if the TCAS II System Option was loaded per section 3.16. Follow the procedures outlined
in this section to load the necessary software and configuration files to enable the GTX33/33D transponders.
1.
With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “
System Upload
”
page using the PFD1 small FMS knob.
2.
Activate cursor and rotate the small FMS knob to display drop down menu. Highlight
King Air - Options
and press
ENT
key on PFD1.
3.
Rotate the small FMS knob to highlight “
GTX 33ES
”. Press
ENT
key on PFD1.
4.
Verify “
GTX 33ES
” is displayed in the “Item” window. Press “
LOAD
”.
Figure 3-33, GTX33/33D Configuration
5.
Monitor load progress. Verify software load completes without errors as indicated by the following:
•
Green “PASS” in Configuration column for GIA1, GIA 2, GTX 1 and GTX 2.
•
Green “PASS” in Software column for GTX 1 and GTX 2.
•
“Upload Complete………….COMPLETE” in the summary box.
6.
Press
ENT
key on PFD1 to acknowledge upload complete.
7.
Deactivate cursor.
8.
On the MFD, verify that the GTX software part number and version matches the information in G1000/GFC
700 AFCS, King Air 300/B300, 005-00629-02, General Arrangement drawing.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......