______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100
Page 4-73
190-02102-00 Rev.4
4.7.7.2 Miscellaneous Radar Faults
Table 4-11. Possible Radar Faults
Symptom
Possible Cause
Recommended Action
Radar audibly noisy
during ground operation.
Excessive gear train
noise or radome
interference.
• Remove radome.
• Inspect interior surfaces of
the radome for contact with
the radar dish. Correct
interference by adjusting or
replacing radome.
• If no radome interference is
found, perform the
following:
1. Turn on the system.
2. Select the radar page
on the MFD.
3. Press the following
softkeys in the
following order: 7, 9,
9, 7.
4. Press the MODE
softkey
5. Press the TEST
softkey. The radar
dish will begin
scanning, but it will
not be transmitting.
• Test the horizontal and
vertical modes to exercise
the gear train and evaluate
for noise.
• If excessively noisy, replace
the GWX.
Uncontrolled if Printed
Summary of Contents for Cessna Caravan G1000
Page 2: ...BLANK PAGE Uncontrolled if Printed...
Page 288: ...Uncontrolled if Printed...
