______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100
Page 3-3
190-02102-00 Rev.4
Follow these steps to load the digital signature update before loading a 006-B2634-0(X)
loader card when required per the conditions above.
1. Download the digital signature update executable program Garmin P/N 006-
B3071-01 from the Garmin Dealer Resource center. Run the program to make an
SD card for use in the aircraft.
2. Open the PFD1, MFD, and PFD2 circuit breakers.
3. Place the digital signature update card in the top slot of the display that requires
the update.
4. Hold the ENT key on the display and restore power by closing the circuit breaker.
5. When the words INITIALIZING SYSTEM appear in the upper left corner of the
display, release the ENT key.
6. Follow the on-screen prompts to update system files and boot block software.
7. When the load is complete, open the display circuit breaker and remove the card
from the top slot.
8. Repeat steps 3 - 7 for all displays that require the update.
Uncontrolled if Printed
Summary of Contents for Cessna Caravan G1000
Page 2: ...BLANK PAGE Uncontrolled if Printed...
Page 288: ...Uncontrolled if Printed...
