______________________________________________________________________________
____________________________________________________________________________
Page 3-16
LMM for the Kodiak 100
190-02102-00 Rev.4
4. Once 01 Baseline is selected, the cursor moves to the ITEM window. Turn the
small FMS knob to activate the drop-down menu. Highlight the appropriate base-
line configuration, then press the ENT key to select it. The PRODUCT field will
then populate.
5. Press the CHK All softkey.
6. Press the LOAD softkey.
7. Monitor the loading progress and make sure the software load completes without
errors as indicated by the following:
a) Green PASS or White N/A in all Configuration and Software columns.
b) Upload Complete. COMPLETE is in the summary box.
8. Select Delete if the Detected new LOG window appears.
9. Press the ENT key to acknowledge the UPLOAD COMPLETE box.
10. After completing the 01 Baseline Group and applicable options, continue onto
Group 02, then select the applicable option and load it using this same proce-
dure.
Table 3-3. Loader Card Folder Structure Kodiak Series - SW2634.05 and Later
Group
Item
Details
01 - Baseline
Kodiak 100
Loads GDU 1050 screen software
and base configurations for the
Kodiak 100 aircraft.
02 - GIA
GIA 64W
Load when equipped with the GIA
64W.
03 - AHRS
• GRS79 - GMU44
• GRS79 - GMU44B
• Load when equipped with the
GRS79 AHRS and GMU 44
Magnetometers.
• Load when equipped with the
GRS79 AHRS and GMU 44B
Magnetometers.
04 - Autopilot
GFC 700
Load when equipped with the
GFC700 Autopilot System.
05 - GEA
GEA 71B
Load when equipped with the GEA
71B Garmin Engine Airframe.
Uncontrolled if Printed
Summary of Contents for Cessna Caravan G1000
Page 2: ...BLANK PAGE Uncontrolled if Printed...
Page 288: ...Uncontrolled if Printed...