______________________________________________________________________________
____________________________________________________________________________
Page 3-20
LMM for the Kodiak 100
190-02102-00 Rev.4
• Part Number 010-00330-55, SVS
• Part Number 010-00330-58, Aux Video
• Part Number 010-00330-59, Enhanced SAR
• Part Number 010-00330-D1, GWX 70R TD and GCS
• Part Number 010-00330-DD, GMA Delete
• Part Number 010-00330-DK, CMC
• Part Number 010-00330-J9, GWX 75 TD and GCS
• Part Number 010-00330-KA, SurfaceWatch
• Part Number 010-00330-HH, CVDR
1. Remove power from the PFDs and the MFD by opening the PFD1, PFD2 and
MFD circuit breakers.
2. A special enablement card is required to enable some optional G1000 NXi
features. This example refers to TAWS enablement.
NOTE
An enablement card can only enable the applicable feature on one system
(one aircraft). A new enablement card must be used for each feature on
each aircraft.
3. Insert the TAWS enablement card in the upper slot of the PFD1.
4. While holding the ENT key on the PFD1, restore power by closing the PFD1
circuit breaker.
5. When the words INITIALIZING SYSTEM appear in the upper left corner of the
PFD, release the ENT key.
6. Repeat steps 4 and 5 for the MFD and PFD2.
7. On PFD1, go to the System Upload page (default startup page) using the FMS
knobs.
8. Activate the cursor and use the small FMS knob to highlight Configuration Files in
the GROUP field. Press the ENT key.
9. Activate the cursor and use the small FMS knob to highlight Enable TAWS in the
ITEM field. Press the ENT key.
10. Make sure there is a check mark in the box in the configuration column for each
item to be loaded.
11. Press the LOAD softkey.
12. Monitor the status of the upload. When the upload is finished, press the ENT key
to acknowledge the following confirmation:
Uncontrolled if Printed
Summary of Contents for Cessna Caravan G1000
Page 2: ...BLANK PAGE Uncontrolled if Printed...
Page 288: ...Uncontrolled if Printed...