Garmin Cirrus Perspective SR20 Pilot'S Manual Download

Page: 186 / 656

Cirrus Perspective

™

by Garmin – Pilot’s Guide for the SR20/SR22/SR22T

190-00820-08 Rev. A

172

FLIGHT MANAGEMENT

STEM

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

SYMBOL SETUP

All pages with maps can display land symbols (roads, lakes, borders, etc). Land symbols can be removed

totally (turned off).

Displaying/removing all land symbols:

Press the

MENU

Key with the Navigation Map Page displayed. The Page Menu is displayed and the cursor

flashes on the ‘Map Setup’ option.

Press the

ENT

Key. The Map Setup Group Menu is displayed and the cursor flashes on the ‘Map’ option.

Highlight the ‘LAND DATA’ field.

Select ‘On’ or ‘Off’.

Press the

FMS

Knob to return to the Navigation Map Page.

Figure 5-18 Navigation Map Setup Menu - LAND DATA Setup

LAND DATA

On/Off

The label size (TEXT) sets the size at which labels appear on the display (none, small, medium, and large).

The range (RNG) sets the maximum range at which items appear on the display.

Selecting a ‘Land’ or ‘Aviation’ group item text size and range:

Press the

MENU

Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.

Press the

ENT

Key. The Map Setup Menu is displayed.

Select the ‘Land’ or ‘Aviation’ group.

Press the

ENT

Key. The cursor flashes on the first field.

Select the desired land option.

Select the desired text size.

Press the

ENT

Key to accept the selected size.

Select the desired range.

Summary of Contents for Cirrus Perspective SR20

















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cirrus Perspective SR20

Reviews:

Related manuals for Cirrus Perspective SR20

Brands by name

Popular brands

Garmin Cirrus Perspective SR20, Pilot'S Manual

Search results

Summary of Contents for Cirrus Perspective SR20

Reviews:

Related manuals for Cirrus Perspective SR20

Brands by name

Popular brands