manualshive.com logo in svg

Garmin Cirrus Perspective SR20, Pilot'S Manual

The Garmin Cirrus Perspective SR20 is a cutting-edge aircraft equipped with advanced avionics. Ensure a seamless flying experience with the comprehensive Cockpit Reference Manual. Download it for free from our website, providing you with a wealth of valuable information for a secure and successful flight.

Share
Download
background image

Cirrus Perspective

™

 by Garmin – Pilot’s Guide for the SR20/SR22/SR22T

190-00820-08  Rev. A

214

FLIGHT MANAGEMENT

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

5.6  FLIGHT PLANNING

Flight planning on Perspective consists of building a flight plan by entering waypoints one at a time, adding 

waypoints along airways, and inserting departures, airways, arrivals, or approaches as needed.  Perspective allows 
flight planning information to be entered from either the MFD or PFD. The flight plan is displayed on maps using 
different line widths, colors, and types, based on the type of leg and the segment of the flight plan currently being 
flown (departure, enroute, arrival, approach, or missed approach).

Flight Plan Leg Type

Symbol

Active non-heading Leg 

Active heading Leg

Non-heading Leg in the current flight segment

Heading Leg not in the current flight segment

Non-heading Leg not in the active flight segment

Turn Anticipation Arc

Table 5-7  Flight Plan Leg Symbols

Up to 99 flight plans with up to 99 waypoints each can be created and stored in memory. One flight plan can be 

activated at a time and becomes the active flight plan.  The active flight plan is erased when the system is turned 
off and overwritten when another flight plan is activated.  When storing flight plans with an approach, departure, 
or arrival, the system uses the waypoint information from the current database to define the waypoints.  If the 
database is changed or updated, the system automatically updates the information if the procedure has not been 
modified. If an approach, departure, or arrival procedure is no longer available, the procedure is deleted from the 
affected stored flight plan(s), and an alert is displayed (see Miscellaneous Messages in Appendix A) advising that 
one or more stored flight plans need to be edited.

Whenever an approach, departure, or arrival procedure is loaded into the active flight plan, a set of approach, 

departure, or arrival waypoints is inserted into the flight plan along with a header line describing the instrument 
procedure the pilot selected.  The original enroute portion of the flight plan remains active (unless an instrument 
procedure is activated) when the procedure is loaded.

When the database is updated, the airways need to be reloaded also.  Each airway segment is reloaded from 

the database given the entry waypoint, the airway identifier and the exit waypoint.  This reloads the sequence of 
waypoints between the entry and exit waypoints (the sequence may change when the database is updated).  The 

update of an airway can fail during this process.  If that happens, the airway waypoints are changed to regular 
(non-airway) flight plan waypoints, and an alert is displayed (see Miscellaneous Messages in Appendix A).

Summary of Contents for Cirrus Perspective SR20

















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cirrus Perspective SR20

Hemingworth Thread Cabinet Assembly Instructions Manual preview
Thread Cabinet
Brand: Hemingworth Pages: 6
Garmin GMA 1347D-00 Installation Manual preview
GMA 1347D-00
Brand: Garmin Pages: 47
Igloo C3URP Series Instruction Manual preview
C3URP Series
Brand: Igloo Pages: 14
Omcan FR-CN-0667 Instruction Manual preview
FR-CN-0667
Brand: Omcan Pages: 16
ISA PANAVISION Installation Manual preview
PANAVISION
Brand: ISA Pages: 6

Brands by name

Popular brands

Load more brands