Cirrus Perspective
™
by Garmin – Pilot’s Guide for the SR20/SR22/SR22T
190-00820-08 Rev. A
472
AUTOMATIC FLIGHT CONTROL SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
APPROACH
NOTE:
If an approach contains a DME arc, the arc must be flown in Navigation Mode with the GFC 700.
When receiving vectors from ATC, Navigation Mode must be selected prior to intercepting the ARC.
Flying an ILS approach:
1)
Transition from GPS Navigation Mode to Heading Select Mode.
a)
Select the Runway 35L ILS approach for KCOS and select ‘VECTORS’ for the transition. Load and activate the
approach into the flight plan.
b)
Use the
HDG
Knob to set the Selected Heading after getting vectors from ATC.
c)
Press the
HDG
Key. The autopilot turns the aircraft to the desired heading.
d)
Use Heading Select Mode to comply with ATC vectors as requested.
2)
Arm LOC Approach and Glideslope modes.
a)
Ensure the appropriate localizer frequency is tuned.
b)
Press the
APR
Key when cleared for approach to arm Approach and Glideslope modes. ‘LOC’ and ‘GS’ appear
in white as armed mode annunciations.
c)
The navigation source automatically switches to LOC. After this switch occurs, the localizer signal can be captured
and the flight director determines when to begin the turn to intercept the final approach course. The flight
director now provides guidance to the missed approach point.
3)
There are two options available at this point, as the autopilot flies the ILS approach:
• Push the
AP DISC
Button at the decision height and land the aircraft.
• Use the
GA
Button to execute a missed approach.
Summary of Contents for Cirrus Perspective SR20
Page 1: ... Cirrus SR20 SR22 SR22T Integrated Avionics System Pilot s Guide ...
Page 2: ......
Page 655: ......
