190-00820-08 Rev. A
Cirrus Perspective
™
by Garmin – Pilot’s Guide for the SR20/SR22/SR22T
575
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
8.13 ELECTRONIC STABILITY AND PROTECTION (ESP
™
)
The optional Garmin
Electronic Stability and Protection (ESP
™
) system is available only when the GFC 700
AFCS is installed. This system is designed to provide automatic control inputs to discourage aircraft operation
outside a desired flight envelope. Garmin ESP
™
works to maintain the desired pitch, roll, and airspeed operating
envelope by automatically engaging one or more servos when the aircraft is near a defined pitch, roll, and/
or airspeed operating limit. While ESP
™
utilizes the same sensors, processors, and actuators as the GFC 700
autopilot, it is a separate function. When the GFC 700 autopilot is engaged and/or the aircraft is at or below 200
feet AGL, the ESP
™
system will not operate.
ESP
™
engages when the aircraft exceeds one or more conditions (pitch, roll, and airspeed) beyond the normal
flight parameters. Enhanced stability for each condition is provided by applying a force to the appropriate control
surface to return the aircraft to the desired flight envelope. This is perceived by the pilot as resistance to control
movement in the undesired direction when the aircraft approaches a steep attitude or high airspeed.
As the aircraft deviates further from the desired attitude or airspeed, the force increases (up to an established
maximum) to encourage control movement in the direction necessary to return to the desired attitude and/or
airspeed range. Except in the case of high airspeed, when maximum force is reached, force remains constant up to
the maximum engagement limit. Above the maximum engagement limit, forces are no longer applied. There is no
maximum engagement related to a high airspeed condition.
The pilot can interrupt ESP
™
by pressing and holding the Autopilot Disconnect (
AP DISC
) switch. Upon releasing
the
AP DISC
switch, ESP
™
force will again be applied, provided aircraft roll attitude is within engagement limits.
ESP
™
can also be overridden by overpowering the servo’s mechanical torque limit.
ESP
™
can be enabled or disabled on the AUX-
SYSTEM SETUP 2 Page on the MFD.
To enable or disable ESP
™
:
1)
Turn the large
FMS
Knob to select the AUX Page Group.
2)
Turn the small
FMS
Knob
to select the System Setup Page.
3)
If necessary, select the
SETUP 2
Softkey to display the AUX-SYSTEM SETUP 2 Page. If the AUX-SYSTEM SETUP 2
is already displayed, proceed to step 4.
4)
Press the
FMS
Knob to activate the cursor.
5)
Turn the large
FMS
Knob to place the cursor in the STABILITY & PROTECTION field.
6)
Turn the small
FMS
Knob
to select ‘ENABLE’ or ‘DISABLE’.
7)
Press the
FMS
Knob to remove the cursor.
ESP
™
is automatically enabled on system power up.
Summary of Contents for Cirrus Perspective SR20
Page 1: ... Cirrus SR20 SR22 SR22T Integrated Avionics System Pilot s Guide ...
Page 2: ......
Page 655: ......