manualshive.com logo in svg

Garmin Cirrus Perspective SR20, Pilot'S Manual

The Garmin Cirrus Perspective SR20 is a cutting-edge aircraft equipped with advanced avionics. Ensure a seamless flying experience with the comprehensive Cockpit Reference Manual. Download it for free from our website, providing you with a wealth of valuable information for a secure and successful flight.

Share
Download
background image

Cirrus Perspective

™

 by Garmin – Pilot’s Guide for the SR20/SR22/SR22T

190-00820-08  Rev. A

iv

WARNINGS, CAUTIONS, AND NOTES

 WARNING:

 

Do not use GPS to navigate to any active waypoint identified as a ‘NON WGS84 WPT’ by a 

system message.  ‘NON WGS84 WPT’ waypoints are derived from an unknown map reference datum that 
may be incompatible with the map reference datum used by GPS (known as WGS84) and may be positioned 
in error as displayed.

 CAUTION: 

The PFD and MFD displays use a lens coated with a special anti-reflective coating that is very 

sensitive to skin oils, waxes, and abrasive cleaners.  CLEANERS CONTAINING AMMONIA WILL HARM THE 
ANTI-REFLECTIVE COATING.  It is very important to clean the lens using a clean, lint-free cloth and an 
eyeglass lens cleaner that is specified as safe for anti-reflective coatings.

 CAUTION: 

The Perspective

™

 does not contain any user-serviceable parts.  Repairs should only be made by an 

authorized Garmin service center.  Unauthorized repairs or modifications could void both the warranty and 
the pilot’s authority to operate this device under FAA/FCC regulations.

 

NOTE: 

When using on-board lightning detection systems such as the L-3 WX-500 Stormscope

®

, there are 

several atmospheric phenomena in addition to nearby thunderstorms that can cause isolated discharge 
points in the strike display mode.  However, clusters of two or more discharge points in the strike display 
mode do indicate thunderstorm activity if these points reappear after the screen has been cleared.

 NOTE: 

All visual depictions contained within this document, including screen images of the Perspective

™

 

panel and displays, are subject to change, and may not reflect the most current Perspective

™

  system.  

Depictions of equipment may differ slightly from the actual equipment.

 NOTE: 

This device complies with part 15 of the FCC Rules.  Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

 

NOTE: 

Interference from GPS repeaters operating inside nearby hangars can cause an intermittent loss of 

attitude and heading displays while the aircraft is on the ground.  Moving the aircraft more than 100 feet 
away from the source of the interference should alleviate the condition.

 NOTE: 

Use of polarized eyewear may cause the flight displays to appear dim or blank.

 NOTE

: 

This product, its packaging, and its components contain chemicals known to the State of California 

to cause cancer, birth defects, or reproductive harm.  This notice is being provided in accordance with 
California’s Proposition 65.  For additional information, refer to the website at www.garmin.com/prop65.

Summary of Contents for Cirrus Perspective SR20

















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cirrus Perspective SR20

Data Display Colonial Mall User Manual preview
Colonial Mall
Brand: Data Display Pages: 45
Garmin GMA 245 Pilot'S Manual preview
GMA 245
Brand: Garmin Pages: 30
Honeywell Bendix/King KMD850 Pilot'S Manual Addendum preview
Bendix/King KMD850
Brand: Honeywell Pages: 21
ExpoDisplays MultiQuad MQ-F14 Assembly Instructions Manual preview
MultiQuad MQ-F14
Brand: ExpoDisplays Pages: 19
Garmin G3X Touch Pilot'S Manual preview
G3X Touch
Brand: Garmin Pages: 470
Garmin GNS 430 Operating Manual preview
GNS 430
Brand: Garmin Pages: 27
Garmin GNC 250 Installation Manual preview
GNC 250
Brand: Garmin Pages: 44
Garmin GMA 350H Pilot'S Manual preview
GMA 350H
Brand: Garmin Pages: 42
Garmin GNC 250 Pilot'S Manual preview
GNC 250
Brand: Garmin Pages: 112
Garmin GNC 420 Installation Manual preview
GNC 420
Brand: Garmin Pages: 136
Delfield F5MR48N Specifications preview
F5MR48N
Brand: Delfield Pages: 2

Brands by name

Popular brands

Load more brands