190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
10
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
PFD/MFD CONTROL UNIT
The additional controls for the PFD and MFD are located on the PFD/MFD Control Unit (GCU 478). The
following list provides an overview of the controls located on the PFD/MFD Control Unit:
Figure 1-3 PFD/MFD Control Unit (GCU 478)
3
4
5
2
7
8
9
18
17
10
1
19
11
13
12
14
21
20
15
16
6
1
CLR Key
– Erases information, cancels entries, or removes page menus. Pressing and holding this key
displays the Navigation Map Page automatically.
2
FPL Key
– Displays the active Flight Plan Page for creating and editing the active flight plan, or for
accessing stored flight plans.
3
Direct-to Key (
)
– Allows the user to enter a destination waypoint and establish a direct course to the
selected destination (the destination is either specified by the identifier, chosen from the active route, or
taken from the map pointer position).
4
MENU Key
– Displays a context-sensitive list of options. This list allows the user to access additional
features or make setting changes that relate to particular pages.
5
PROC Key
– Gives access to IFR departure procedures (DPs), arrival procedures (STARs) and approach
procedures (IAPs) for a flight plan. If a flight plan is used, available procedures for the departure and/or
arrival airport are automatically suggested. Theses procedures can then be loaded into the active flight
plan. If a flight plan is not used, both the desired airport and the desired procedure may be selected.
6
ENT Key
– Validates or confirms a menu selection or data entry.
7
FMS/XPDR/COM/NAV Key
– Acts as the
FMS
Knob for the MFD. Sets the transponder code when in
XPDR
mode. Acts as the
COM
Knob when in COM tuning mode. Acts as the
NAV
Knob when in NAV
tuning mode.
