Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
93
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EAS
Audio and
CNS
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
d)
Touch the
Enter
Button to accept the barometric minimum altitude and return to the
‘Approach Selection’ Screen.
Or
:
a)
If temperature compensated minimum is desired, touch the
Minimums
Button to
display the ‘Minimums Source’ Window.
b)
Touch the
Temp Comp
Button. The first time temperature compensation is enabled,
the ‘Destination Temp’ Screen is displayed. Use the keypad and the
Enter
Button to
select the temperature at the airport. If temperature compensation was previously
enabled, the previous entry for destination temperature is automatically entered.
c)
Use the keypad to select the minimums altitude.
d)
Touch the
Enter
Button to accept the temperature compensated minimums and
return to the ‘Approach Selection’ Screen.
6)
To set the landing runway, touch the
Landing RWy
Button to display the ‘Select Landing
Runway' Screen and touch the desired runway.
7)
Touch the
Preview
Button, then the
Show on Map
Button to show the preview of
the approach on the active display pane or touch the
Show Chart
Button to show the
approach chart instead.
8)
Select the Approach Mode:
If an RNAV approach was selected and User Approach Mode Selection is enabled, touch
the
Approach Mode
Button and change the mode to the desired settings.
9)
Touch the
Load
Button to insert the approach into the flight plan.
If a visual approach was selected, an advisory message will appear stating that obstacle
clearance is not provided and the approach glidepath and threshold crossing height will
also be displayed. Touch the
OK
Button to continue.
Loading an approach procedure into a stored flight plan:
1)
From MFW Home, touch
Flight Plan
>
Flight Plan Options
.
2)
Touch the
Flight Plan Catalog
Button to display the ‘Flight Plan Catalog’ Screen.
3)
Touch a Stored Flight Plan Button to display the ‘Catalog Options’ Screen.
4)
Touch the
Edit
Button to display the ‘Edit Stored Flight Plan’ Screen.
5)
Touch the
Flight Plan Options
Button to display the ‘Flight Plan Options’ Window.
6)
Touch the
Load Approach
Button to display the ‘Approach Selection’ Screen.
7)
Select the airport and approach:
a)
If needed, touch the
Airport
Button to display the keypad and use it to select the
approach airport.
b)
Touch the
Enter
Button to accept the approach airport.
