Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
129
Hazard Avoidance
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EAS
Audio and
CNS
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Selecting a Stormscope operating mode (PFD maps):
1)
From PFW Home, touch
PFD Map Settings
.
2)
If not selected, touch either the
HSI Map
or
Inset Map
Button to allow for selection of
map overlays.
3)
Touch the Stormscope Lightning
Settings
Button.
4)
Touch either the
Cell
or
Strike
Buttons.
Clearing Stormscope Lightning (PFD maps):
1)
From PFW Home, touch the
PFD Map Settings
Button.
2)
If not selected, touch either the
HSI Map
or
Inset Map
Button to allow for selection of
map overlays.
3)
Touch the Stormscope Lightning
Settings
Button.
4)
Touch the
Clear Stormscope Lightning
Button.
Selecting a maximum Stormscope map range for the PFD maps:
1)
From PFW Home, touch
PFD Map Settings
.
2)
If not selected, touch either the
HSI Map
or
Inset Map
Button to allow for selection of
map overlays.
3)
Scroll as needed and touch the Stormscope Lightning
Settings
Button.
4)
Touch the
Stormscope
Button (current range setting displayed in cyan).
5)
Scroll as needed and touch a desired map range setting from the list.
Enabling/disabling Stormscope information on ‘Navigation Map’ Panes:
1)
From MFW Home, touch
Map > Map Selection > Map Settings
.
2)
If not selected, touch the
Sensor
Tab.
3)
Scroll as needed and touch the
Stormscope Lightning
Button.
Selecting a Stormscope mode for ‘Navigation Map’ Panes:
1)
From MFW Home, touch
Map > Map Selection > Map Settings
.
2)
If not selected, touch the
Sensor
Tab.
3)
Scroll as needed and touch the Stormscope Lightning
Settings
Button.
4)
Touch either the
Cell
Button or the
Strike
Button. Button annunciator is green for
currently selected mode.
5)
When finished, touch
Back
or
Home
.
Clearing Stormscope information on ‘Navigation Map’ Panes:
1)
From MFW Home, touch
Map > Map Selection > Map Settings
.
2)
If not selected, touch the
Sensor
Tab.
3)
Scroll as needed and touch the Stormscope Lightning
Settings
Button.
