background image

2.5 

Interfacing with the Sonar Display

37

2.5.2  Selecting Split Screens

Split screens in the 

2-Split Frequency

 and 

4-Split Frequency

 modes can be adjusted 

individually.

•  Press 

[FOCUS]

 to sequentially highlight split screens. The highlighted split screen is 

automatically selected.

•  Press 

[BACK]

 to cancel the highlight. The selection is remembered until you switch to 

another mode.

2.5.3  Invoking the Cursor

Press left/right (up/down in 

SideVü

 mode) on the control pad to bring up the cursor and 

pause the sonar display. 

The coordinates, distance, and bearing corresponding to the cursor are shown at the top-

left of the sonar display.

80�3

Paused

0�00

007

f

t

f

t

°

M

0

10

20

30

40

50

60

N  25°45�563'

W080°10�426'

New Waypoint

26�3

f

t

70

80

86

0�00

f

t

63�2

F

Bottom depth

Temperature

Distance

Scrollbar

Depth

Coordinates

Distance

Bearing

With the cursor showing:

•  Press left (down in 

SideVü

 mode) to see older data, keep pressing to scroll the screen.

•  Press right (up in 

SideVü

 mode) to see newer data, keep pressing to scroll the screen.

•  Press up/down (left/right in 

SideVü

 mode) to go shallower/deeper.

•  Rotate the main knob to zoom in/out on the cursor.
•  Press 

[SELECT]

 or 

[MARK]

 to mark a waypoint at the cursor.

•  Press 

[BACK]

 to return to live sonar data. A straight line will separate the readings 

before and after the pause.

Summary of Contents for CS 1522











































































Reviews: