background image

Introduction

 WARNING

Always consult your physician before you begin or modify any 

exercise program.
See the 

Important Safety and Product Information

 guide in the 

product box for product warnings and other important 

information.

Getting Started

When using your device the first time, you should complete 

these tasks to set up the device and get to know the basic 

features.

1

Charge the device (

page 1

).

2

Register the device (

page 17

).

3

Learn about the sensor data and modes (

page 1

).

4

Acquire satellites and record a track (

page 3

).

5

Create a waypoint (

page 3

).

Charging the Device

NOTICE

To prevent corrosion, thoroughly dry the contacts and the 

surrounding area before charging or connecting to a computer.

The device is powered by a built-in lithium-ion battery that you 

can charge using a standard wall outlet or a USB port on your 

computer.

1

Plug the USB end of the cable into the AC adapter or a 

computer USB port.

2

Plug the AC adapter into a standard wall outlet.

3

Align the left side of the charging cradle 

À

 with the groove on 

the left side of the device.

4

Align the hinged side of the charger 

Á

 with the contacts on 

the back of the device.
When you connect the device to a power source, the device 

turns on.

5

Charge the device completely.

Keys

À

Select to turn the backlight on and off. Hold to turn the 
device on and off.

Á

D2

Select to scroll through the data pages, options, and 
settings. Hold to navigate to an airport by airport code 

page 5

).

Â

NRST

Select to scroll through the data pages, options, and 
settings. Hold to navigate to the nearest airport 
(

page 5

).

Ã

Select to return to the previous screen. Hold to view the 
status page.

Ä

Action key Select to open the menu for the current screen. Select 

to choose an option and to acknowledge a message. 
Hold to mark a waypoint.

Viewing the Status Page

You can quickly switch to this page to view the time of day, 

battery life, and GPS status information from any other page.

Hold 

.

Sensors

Viewing the Data Pages

Customizable data pages allow you to quickly access real-time 

data from internal and connected sensors. When you begin 

tracking or navigating, additional data pages appear.

From the time of day page, select   or   to cycle through 

the data pages.

Data Pages

The data pages available on your device vary based on the 

device mode. In low power mode, GPS is disabled, and the 

device does not record data. In tracking mode, GPS is enabled 

and sensor data is recorded to the track log, but you are not 

navigating to a destination. In navigation mode, you are 

navigating to a destination.

NOTE: 

Your body temperature affects the temperature and 

density altitude. To get the most accurate temperature reading, 

remove the device from your wrist and wait 20-30 minutes.

Introduction

1

Summary of Contents for D2 Pilot

























Reviews: