Changing the Spring Bar Bands
You can replace the bands with new Descent G1 bands or compatible QuickFit 22 bands.
1 Use the pin tool to push in the watch pin.
2 Remove the band from the watch.
3 Select an option:
• To install Descent G1 bands, align one side of the new band with the holes on the watch, push in the
exposed watch pin, and press the band into place.
NOTE: Make sure the band is secure. The watch pin should align with the holes on the watch.
• To install QuickFit 22 bands, remove the watch pin from the Descent G1 band, replace the watch pin on
the watch, and press the new band into place.
Device Information
97