Navigating with the Dive Compass
1 During a Single-Gas, Multi-Gas, CCR, or Gauge dive, scroll to the dive compass.
The compass indicates your directional heading .
2 Press START to set the heading.
The compass indicates deviations from the set heading .
3 Press START, and select an option:
• To reset the heading, select Reset Heading.
• To change the heading by 180 degrees, select Set to Recip..
NOTE: The compass indicates the reciprocal heading with a gray mark.
• To set to a 90-degree heading left or right, select Set to 90L or Set to 90R.
• To clear the heading, select Clear Heading.
Diving
15