Garmin dezlCAM, Owner'S Manual

HOS

Hours of service status shortcut
Current time

Battery status

Connected to Smartphone Link

Temperature

Unread myGarmin

™

 messages

Dash camera recording status

Using the On-Screen Buttons

• Select 

 to return to the previous menu screen.

• Hold 

 to quickly return to the main menu.

• Select   or   to see more choices.
• Hold   or   to scroll faster.
• Select   to see a menu of options for the current screen.

Entering and Exiting Sleep Mode

You can use sleep mode to conserve battery power when your 

device is not in use. While in sleep mode, your device uses very 

little power and can wake instantly for use.

TIP: 

You can charge your device faster by putting it in sleep 

mode while charging the battery.

Press the power key 

À

.

Turning Off the Device

1

Hold the power key until a prompt appears on the screen.
The prompt appears after five seconds. If you release the 

power key before the prompt appears, the device enters 

sleep mode.

2

Select 

Off

.

Adjusting the Volume

1

Select 

Volume

.

2

Select an option:
• Use the slider bar to adjust the volume.
• Select   to mute the device.
• Select   for additional options.

Enabling Automatic Volume

Your device can increase or decrease the volume automatically 

based on the level of background noise.

1

Select 

Volume

 >  .

2

Select 

Automatic Volume

.

Adjusting the Screen Brightness

1

Select 

Settings

 > 

Display

 > 

Brightness

.

2

Use the slider bar to adjust the brightness.

Dash Camera

Aligning the Camera

 WARNING

Do not attempt to align the camera while driving.

You should align the dash camera each time you mount the or 

reposition the device.

1

Select 

Settings

 > 

Camera

 >   > 

Alignment

.

2

Tilt the device and rotate the camera to align the camera.
The crosshairs should point straight ahead, and the horizon 

line should be centered between the top and bottom of the 

screen.

Dash Camera Recording

NOTICE

Legal Restrictions

In some jurisdictions it could be considered an invasion of 

privacy rights to take or publicly display photographs or videos 

of people or their vehicles using this product. It is your 

responsibility to know and comply with applicable laws and 

rights to privacy in your jurisdiction.

Before you can record video using the integrated dash camera, 

you must install a camera memory card (

Installing the Dash 

Camera Memory Card

, page 1

).

By default, the device immediately starts recording video when it 

turns on. It continues recording, overwriting the oldest, non-

saved video until it turns off. While recording, the LED is solid 

red.
The device records continuously until the device is turned off or 

video recording is disabled.

Saving a Video Recording

By default, the device uses a sensor to detect possible 

accidental collisions and saves video footage before, during, 

and after the detected event.
You can also manually save video at any time.

1

While recording, select the camera key 

À

.

The device saves a photo and the video footage before, 

during, and after you select the key. The LED flashes red 

while the device is saving video footage.

2

Select the camera key again to extend the saved recording 

time (optional).
A message indicates the amount of video footage to be 

saved.

The memory card has limited storage. After you save a video 

recording, you should transfer the recording to your computer or 

other external storage location for permanent storage (

Videos 

and Photos on Your Computer

, page 3

).

Taking a Photo

You can take still photographs with this device. By default, the 

device stores time and location information with the photo.

Select 

Apps

 > 

Dash Cam

 >  .

The device takes a photo and saves it to the memory card.

Starting and Stopping Dash Camera Recording

1

Select 

Apps

 > 

Dash Cam

.

2

Dash Camera