The address of the location appears at the bottom of the
screen.
4
Select the location description.
5
Select
Set Location
.
Dash Cam Settings
Select
Settings
>
Dash Cam
.
Camera placement
: allows you to set the vehicle height and
camera position, and align the dash cam (
).
Record on Startup
: enables the dash camera to start recording
video automatically when you turn on the device.
Automatic Incident Detection
: saves video automatically when
the device detects a possible driving incident.
Record Audio
: enables or disables audio recording while you
are recording with the dash cam.
Data Overlay
: includes date, time, location, and speed
information in the recorded video.
Video Resolution
: sets the resolution and quality for video
recordings.
Record After Power Loss
: continues recording video up to a
selected time period after external power is lost.
Wireless network settings
The wireless network settings allow you to manage Wi
‑
Fi
®
networks, paired Bluetooth devices and Bluetooth features.
Select
Settings
>
Wireless Networks
.
Bluetooth
: enables Bluetooth wireless technology.
Paired Device Name
: the names of paired Bluetooth devices
appear in the menu. You can select a device name to change
Bluetooth feature settings for that device.
Search for Devices
: searches for nearby Bluetooth devices.
Friendly Name
: allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi-Fi
: enables the Wi
‑
Fi radio.
Saved Networks
: allows you to edit or remove saved networks.
Search for Networks
: searches for nearby Wi
‑
Fi networks
(
).
Driver Assistance Settings
Select
Settings
>
Driver Assistance
.
Audible Driver Alerts
: enables an audible alert for each type of
driver alert (
Driver awareness features and alerts
).
Fatigue Warning
: alerts you when you have been driving for a
long period without a break.
Incident Notification
: allows you to set up a contact to be
notified when the device detects a possible vehicle incident
(
Incident Detection and Notifications
).
Proximity Alerts
: alerts you when you are near custom points
of interest or red light cameras.
NOTE:
you must have custom points of interest (POIs)
loaded for proximity points alerts to display. This feature is
not available in all areas.
Forward collision warning
: allows you to enable and set the
sensitivity of the forward collision warning (
). A higher sensitivity alerts you
sooner than a lower sensitivity.
Garmin Real Vision™
: enables or disables Garmin Real Vision,
which overlays guidance information on a live image from the
dash cam (
Destination Arrival with Garmin Real Vision
).
Go Alert
: alerts you when stopped traffic starts moving (
).
Lane Departure Warning
: enables an alert when the device
detects you may be crossing a lane boundary unintentionally
(
).
Backup camera settings
The backup camera settings allow you to manage paired
Garmin backup cameras and camera settings. This menu
appears on your navigation device only when the device is
connected to a wireless camera receiver cable. See the owner's
manual for your backup camera for detailed information about
pairing cameras and camera settings. Go to
to purchase a Garmin backup camera.
Select
Settings
>
Backup Camera
, and select a paired camera.
Unpair
: removes the paired camera. You must pair the camera
again before you can view it using this device and cable.
Rename
: allows you to rename the paired camera.
Guidance Lines
: shows or hides guidance lines and allows you
to adjust the position of the guidance lines.
babyCam settings
The babyCam settings allow you to manage paired Garmin
babyCam
™
cameras and camera settings. This menu appears
on your navigation device only when the device is connected to
a wireless camera receiver cable. See the owner's manual for
your camera for detailed information about pairing cameras and
camera settings. Go to
to purchase a
Garmin babyCam camera.
Select
Settings
>
babyCam
, and select a paired camera.
Power Settings
: allows you to set the amount of time the video
appears on the screen.
Flip Video
: allows you to flip or mirror the video.
Alignment
: displays the babyCam video to help you align the
camera.
Check Seat Reminder
: enables a reminder to check for rear
seat passengers before exiting the vehicle.
Unpair
: removes the paired camera.
Rename
: allows you to rename the paired camera.
Display settings
Select
Settings
>
Display
.
Colour Mode
: allows you to select day or night colour mode. If
you select the Auto option, the device automatically switches
to day or night colours based on the time of day.
Brightness
: allows you to adjust the display brightness.
Display Timeout
: allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot
: allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select
Settings
>
Traffic
.
Traffic
: enables traffic.
Current Provider
: sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Subscriptions
: lists the current traffic subscriptions.
Optimise Route
: enables the device to use optimised
alternative routes automatically or upon request (
).
22
Garmin DriveAssist settings
