Descent - Maximum
: The maximum rate of descent in feet per
minute or meters per minute since the last reset.
Descent - Total
: The total elevation distance descended since
the last reset.
Distance To Destination
: The remaining distance to the final
destination. You must be navigating for this data to appear.
Distance To Next
: The remaining distance to the next waypoint
on the route. You must be navigating for this data to appear.
Elevation
: The altitude of your current location above or below
sea level.
Elevation Above Ground
: The altitude of your current location
above ground level (if maps contain sufficient elevation
information).
Elevation - Maximum
: The highest elevation reached since the
last reset.
Elevation - Minimum
: The lowest elevation reached since the
last reset.
ETA At Destination
: The estimated time of day when you will
reach the final destination (adjusted to the local time of the
destination). You must be navigating for this data to appear.
ETA At Next
: The estimated time of day when you will reach the
next waypoint on the route (adjusted to the local time of the
waypoint). You must be navigating for this data to appear.
Glide Ratio
: The ratio of horizontal distance traveled to the
change in vertical distance.
Glide Ratio To Dest
: The glide ratio required to descend from
your current position to the destination elevation. You must
be navigating for this data to appear.
GPS Elevation
: The altitude of your current location using GPS.
GPS Heading
: The direction you are moving based on GPS.
GPS Signal Strength
: The strength of the GPS satellite signal.
Grade
: The calculation of rise (elevation) over run (distance).
For example, if for every 10 ft. (3 m) you climb you travel
200 ft. (60 m), the grade is 5%.
Heading
: The direction you are moving.
Heart Rate
: Your heart rate in beats per minute (bpm). Your
device must be connected to a compatible heart rate monitor.
Lap Distance
: The distance traveled for the current lap.
Laps
: The number of laps completed for the current activity.
Last Lap Time
: The stopwatch time for the last completed lap.
Location (lat/lon)
: The current position in latitude and longitude
regardless of the selected position format setting.
Location (selected)
: The current position using the selected
position format setting.
Location of Destination
: The position of your final destination.
You must be navigating for this data to appear.
Odometer
: A running tally of distance traveled for all trips. This
total does not clear when resetting the trip data.
Off Course
: The distance to the left or right by which you have
strayed from the original path of travel. You must be
navigating for this data to appear.
Pointer
: An arrow points in the direction of the next waypoint or
turn. You must be navigating for this data to appear.
Speed
: The current rate of travel.
Speed Limit
: The reported speed limit for the road. Not
available in all maps and in all areas. Always rely on posted
road signs for actual speed limits.
Speed - Maximum
: The highest speed reached since the last
reset.
Speed - Moving Avg.
: The average speed while moving since
the last reset.
Speed - Overall Avg.
: The average speed while moving and
stopped since the last reset.
Stopwatch Timer
: The stopwatch time for the current activity.
Sunrise
: The time of sunrise based on your GPS position.
Sunset
: The time of sunset based on your GPS position.
Temperature
: The temperature of the air. Your body
temperature affects the temperature sensor. Your device
must be connected to a wireless temperature sensor for this
data to appear.
Temperature - Water
: The temperature of the water. Your
device must be connected to a NMEA 0183 device capable
of acquiring the water temperature.
Time of Day
: The current time of day based on your current
location and time settings (format, time zone, daylight saving
time).
Time To Destination
: The estimated time remaining before you
reach the destination. You must be navigating for this data to
appear.
Time To Next
: The estimated time remaining before you reach
the next waypoint in the route. You must be navigating for
this data to appear.
To Course
: The direction in which you must move to get back
on the route. You must be navigating for this data to appear.
Total Lap
: The stopwatch time for all the completed laps.
Track Distance
: The distance traveled for the current track.
Trip Odometer
: A running tally of the distance traveled since
the last reset.
Trip Time
: A running tally of the total time spent moving and not
moving since the last reset.
Trip Time - Moving
: A running tally of the time spent moving
since the last reset.
Trip Time - Stopped
: A running tally of the time spent not
moving since the last reset.
Turn
: The angle of difference (in degrees) between the bearing
to your destination and your current course. L means turn
left. R means turn right. You must be navigating for this data
to appear.
Velocity Made Good
: The speed at which you are closing on a
destination along a route. You must be navigating for this
data to appear.
Vertical Dist to Dest
: The elevation distance between your
current position and the final destination. You must be
navigating for this data to appear.
Vertical Speed
: The rate of ascent or descent over time.
Vertical Speed To Dest
: The rate of ascent or descent to a
predetermined altitude. You must be navigating for this data
to appear.
Waypoint At Dest
: The last point on the route to the
destination. You must be navigating for this data to appear.
Waypoint At Next
: The next point on the route. You must be
navigating for this data to appear.
System Settings
Select
Setup
>
System
.
Satellite
: Sets the satellite system (
).
Language
: Sets the text language on the device.
NOTE:
Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Interface
: Sets the format of the serial interface (
).
AA Battery Type
: Allows you to change the type of AA battery
you are using.
8
Customizing the Device
