Garmin DriveTrack 70, Owner'S Manual

• An FM traffic receiver is included in product models ending 

with LT or LMT.

• A digital traffic receiver is included in product models ending 

with LMT-D or LMTHD.

• The device must be connected to vehicle power using the 

included power cable to receive traffic data using the traffic 

receiver.

• The device must be within range of a traffic data signal to 

receive information using the traffic receiver.

Receiving Traffic Data Using a Traffic 

Receiver

NOTICE

Heated (metallized) windshields could degrade the performance 

of the traffic receiver.

If your device includes a traffic receiver, it can receive traffic 

data from an over-the-air broadcast signal, where available. This 

feature is not available in all areas or for all product models.

NOTE: 

In some areas, traffic information may be received from 

FM radio stations using HD Radio

™

 technology.

1

Verify your device includes a traffic receiver.
• An FM traffic receiver is included in product models 

ending with LT or LMT.

• A digital traffic receiver is included in product models 

ending with LMT-D or LMTHD.

2

Connect the device to vehicle power using the power cable 

included with your device (

Connecting the Device to Vehicle 

Power

, page 1

).

The power cable included with your device includes an 

antenna for the traffic receiver.

When you are within a traffic coverage area, your device can 

display traffic information and help you avoid traffic delays.

About Traffic Subscriptions

You can purchase additional subscriptions or a renewal if your 

subscription expires. Go to 

http://www.garmin.com/traffic

.

Viewing Traffic Subscriptions

Select 

Settings

 > 

Traffic

 > 

Subscriptions

.

Adding a Subscription

You can purchase traffic subscriptions for other regions or 

countries.

1

From the main menu, select 

Traffic

.

2

Select 

Subscriptions

 >  .

3

Write down the FM traffic receiver unit ID.

4

Go to 

www.garmin.com/fmtraffic

 to purchase a subscription 

and get a 25-character code.
The traffic subscription code cannot be reused. You must 

obtain a new code each time you renew your service. If you 

own multiple FM traffic receivers, you must obtain a new 

code for each receiver.

5

Select 

Next

 on the device.

6

Enter the code.

7

Select 

Done

.

Enabling Traffic

You can enable or disable traffic data.

1

Select 

Settings

 > 

Traffic

.

2

Select the 

Traffic

 check box.

Voice Command

NOTE: 

Voice command is not available for all languages and 

regions, and may not be available on all models.

NOTE: 

Voice Activated Navigation may not achieve desired 

performance when in a noisy environment.
Voice command allows you to use your device by saying words 

and commands. The voice command menu provides voice 

prompts and a list of available commands.

Setting the Wakeup Phrase

The wakeup phrase is a word or phrase you can say to activate 

voice command. The default wakeup phrase is Voice Command.

TIP: 

You can reduce the chance of accidental voice command 

activation by using a strong wakeup phrase.

1

Select 

Apps

 > 

Voice Command

 >   > 

Wake Up Phrase

.

2

Enter a new wakeup phrase.
The device indicates the strength of the wakeup phrase as 

you enter the phrase.

3

Select 

Done

.

Activating Voice Command

Say your wakeup phrase.
The voice command menu appears.

Voice Command Tips

• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices, or the radio, to 

increase the accuracy of the voice recognition.

• Speak commands as they appear on the screen.
• Respond to voice prompts from the device as needed.
• Increase the length of your wakeup phrase to reduce the 

chance of accidental voice command activation.

• Listen for two tones to confirm when the device enters and 

exits voice command.

Starting a Route Using Voice Command

You can say the names of popular, well-known locations.

1

Say your wakeup phrase (

Setting the Wakeup Phrase

, 

page 11

).

2

Say 

Find Place

.

3

Listen for the voice prompt, and speak the name of the 

location.

4

Say the line number.

5

Say 

Navigate

.

Muting Instructions

You can disable the voice prompts for voice command without 

muting the device.

1

Select 

Apps

 > 

Voice Command

 >  .

2

Select 

Mute Instructions

 > 

Enabled

.

Voice Control

For regions where the Voice Command feature is unavailable, 

the Voice Control feature is activated. Voice Control allows you 

to use your voice to control the device. Before you can use the 

Voice Control feature, you must configure it for your voice.

Configuring Voice Control

The Voice Control feature must be configured for a single user's 

voice and does not work for other users.

1

Select 

Apps

 > 

Voice Control

.

Voice Command

11