This is the method to enter the crash
site.
From the Menu Page
Carefully press the thumb stick down.
A click indicates correct action.
Units of measure are metres
The “Dist to next” panel shows how far
you have to go.
Turn the Etrex horizontally until the line
points directly in front of you. This is
the direction to walk.
The next page explains how this
works.
The display now shows the com-
pass and you can start navigating
to the crash. Turn the Etrex hori-
zontally until the arrow is pointing
towards the top of the screen. This
is the direction to move.
If required press menu until the
main menu shows and then select
Map.
The display will show you the
crash waypoint with a magenta
line showing the way to it from
your presents position.
Periodically stop and check your
position and then readjust your
direction of movement
If you want to return to the com-
pass just press menu and then se-
lect Compass.
To use the course deviation indi-
cator (CDI)
Use the menu and select Setup
Heading.
Use the thumb stick to select
Go to Line(Pointer) (third selection
Comments
