Editing a Saved Track
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
.
4
Select an option:
• Select
Name
, and enter the new name.
• Select
Track Color
, and select a color.
Saving a Track as a Route
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
>
Save As
>
Save as Route
.
Browsing for and Navigating a Recorded Track
Before you can browse a list of tracks and navigate to them, you
must record and save at least one track (
).
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Follow Track
.
4
Select an option:
• To navigate the track from the starting point used when
the track was created, select
Forward
.
• To navigate the track from the destination point used
when the track was created, select
Backward
.
5
Review the course indicated by the colored line.
6
Follow the line along each leg in the route, steering to avoid
land, shallow water, and other obstacles.
Deleting a Saved Track
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Delete
.
Deleting All Saved Tracks
Select
Nav Info
>
Manage Data
>
Clear User Data
>
Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active track.
1
Select
Nav Info
>
Tracks
>
Follow Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow water,
and other obstacles.
Clearing the Active Track
Select
Nav Info
>
Tracks
>
Clear Active Track
.
The track memory is cleared, and the active track continues
to be recorded.
Managing the Track Log Memory During Recording
1
Select
Nav Info
>
Tracks
>
Active Track Options
.
2
Select
Record Mode
.
3
Select an option:
• To record a track log until the track memory is full, select
Fill
.
• To continuously record a track log, replacing the oldest
track data with new data, select
Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select
Nav Info
>
Tracks
>
Active Track Options
>
Record
Interval
>
Interval
.
2
Select an option:
• To record the track based on a distance between points,
select
Distance
>
Change
, and enter the distance.
• To record the track based on a time interval, select
Time
>
Change
, and enter the time interval.
• To record the track plot based on a variance from your
course, select
Resolution
>
Change
, and enter the
maximum error allowed from the true course before
recording a track point.
Boundaries
Boundaries allow you to avoid or remain in designated areas in
a body of water. You can set an alarm to alert you when you
enter or exit a boundary.
You can create boundary areas, lines, and circles using the
map. You can also convert saved tracks and routes into
boundary lines. You can create a boundary area using
waypoints by creating a route from the waypoints, and
converting the route into a boundary line.
You can select a boundary to act as the active boundary. You
can add the active boundary data to the data fields on the chart.
Creating a Boundary
1
Select
Nav Info
>
Boundaries
>
New Boundary
.
2
Select a boundary shape.
3
Follow the on-screen instructions.
Boundary Display Settings
Select
Nav Info
>
Boundaries
>
Display Options
.
Distance/Bearing
: Allows you to hide or display the bearing and
distance to your destination for the active boundary.
Chart Display
: Allows you to hide or display boundaries on the
chart.
Color
: Sets the color of boundaries on the chart.
Converting a Route to a Boundary
Before you can convert a route to a boundary, you must create
and save at least one route (
).
1
Select
Nav Info
>
Routes & Auto Guidance Paths
.
2
Select a route.
3
Select
Edit Route
>
Save as Boundary
.
Converting a Track to a Boundary
Before you can convert a track to a boundary, you must record
and save at least one track (
).
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
>
Save As
>
Save as Boundary
.
Editing a Boundary
1
Select
Nav Info
>
Boundaries
.
2
Select a boundary.
3
Select
Edit Boundary
.
4
Select an option:
• To edit the appearance of the boundary on the chart,
select
Display Options
.
• To change the boundary lines or name, select
Edit
Boundary
.
• To edit the boundary alarm, select
Alarm
.
Navigation with a Chartplotter
17
Summary of Contents for ECHOMAP 60 Series
Page 1: ...ECHOMAP 40 60 70 90SERIES Owner sManual...
Page 49: ......
Page 50: ...support garmin com October 2017 190 02242 00_0A...
