Garmin ECHOMAP 60 Series, Owner'S Manual

1

Select the 

DAB

 source.

2

Select 

Scan

 to scan for available DAB stations.

When scanning is complete, the first available station in the 

first ensemble found begins playing.

NOTE: 

After the first scan is complete, you can select Scan 

again to re-scan for DAB stations. When the re-scan is 

complete, the system starts playing the first station in the 

ensemble you were listening to when you started the re-scan.

Changing DAB Stations

1

Select the 

DAB

 source.

2

If necessary, select 

Scan

 to scan for local DAB stations.

3

Select   or   to change the station.
When you reach the end of the current ensemble, the stereo 

automatically changes to the first available station in the next 

ensemble.

Selecting a DAB Station from a List

1

From the DAB media screen, select 

Browse

 > 

Stations

.

2

Select a station from the list.

Selecting a DAB Station from a Category

1

From the DAB media screen, select 

Browse

 > 

Categories

.

2

Select a category from the list.

3

Select a station from the list.

DAB Presets

You can save your favorite DAB stations as presets for easy 

access.
You can save up to 15 DAB-station presets.

Saving a DAB Station as a Preset

1

From the DAB media screen, select the station to save as a 

preset.

2

Select 

Browse

 > 

Presets

 > 

Save Current

.

Selecting a DAB Preset from a List

1

From the DAB media screen, select 

Browse

 > 

Presets

 > 

View Presets

.

2

Select a preset from the list.

Removing DAB Presets

1

From the DAB media screen, select 

Browse

 > 

Presets

.

2

Select an option:
• To remove one preset, select 

Remove Preset

, and select 

the preset.

• To remove all presets, select 

Remove All Presets

.

SiriusXM Satellite Radio

When you have a FUSION-Link

™

 capable stereo and SiriusXM 

Connect Tuner installed and connected to the chartplotter, you 

may have access to SiriusXM satellite radio, depending on your 

subscription.

Locating a SiriusXM Radio ID

Before you can activate your SiriusXM subscription, you must 

have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the 

SiriusXM Connect Tuner, on the back of its packaging, or by 

tuning your chartplotter to channel 0.

1

Select 

Media

 > 

Source

 > 

SiriusXM

.

2

Tune to channel 0.
The SiriusXM radio ID does not include the letters I, O, S, or 

F.

Activating a SiriusXM Subscription

1

With the SiriusXM source selected, tune to channel 1.

You should be able to hear the preview channel. If not, check 

the SiriusXM Connect Tuner and antenna installation and 

connections, and try again.

2

Tune to channel 0 to locate the Radio ID.

3

Contact SiriusXM listener care by phone at (866) 635-2349 or 

go to 

www.siriusxm.com/activatenow

 to subscribe in the 

United States.

4

Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but 

can take up to an hour. For the SiriusXM Connect Tuner to 

receive the activation message, it must be turned on and 

receiving the SiriusXM signal.

5

If the service is not activated within the hour, go to 

http://care.siriusxm.com/refresh

 or contact SiriusXM by phone 

at 1-855-MYREFRESH (697-3373).

Customizing the Channel Guide

SiriusXM radio channels are grouped in categories. You can 

select the categories of channels that appear in the channel 

guide.

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Media

 > 

Browse

 > 

Channel

.

• If the media device is a GXM

™

 antenna, select 

Media

 > 

MENU

 > 

Category

.

Saving a SiriusXM Channel to the Presets List

You can save your favorite channels to the presets list.

1

Select 

Media

.

2

Select the channel to save as a preset.

3

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Browse

 > 

Presets

.

• If the media device is a GXM antenna, select 

MENU

 > 

Presets

 > 

Add Current Channel

.

Unlocking SiriusXM Parental Controls

1

From the media screen, select 

Browse

 > 

Parental

 > 

Unlock

.

2

Enter your passcode.
The default passcode is 0000.

Setting Parental Controls on SiriusXM Radio Channels

Before you can set parental controls, the parental controls must 

be unlocked.
The parental control feature allows you to limit access to any 

SiriusXM channels, including those with mature content. When 

enabled, the parental control feature requires you to enter a 

passcode to tune to the locked channels.

Select 

Browse

 > 

Parental

 > 

Lock/Unlock

.

A list of channels appears. A checkmark indicates a locked 

channel.

NOTE: 

When you view the channels after setting parental 

controls, the display changes:
•

 indicates a locked channel.

•

 indicates an unlocked channel.

Changing a Parental Passcode on a SiriusXM Radio

Before you can change the passcode, the parental controls must 

be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Change 

PIN

.

2

Enter your passcode and select 

Done

.

3

Enter a new passcode.

4

Confirm the new passcode.

32

Media Player