background image

Chart Layers

You can turn on and off chart layers and customize features of the charts. Each setting is specific to the chart 
or chart view being used.
NOTE: Not all settings apply to all charts and chartplotter models. Some options require premium maps or 
connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present 
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select MENU > Layers.
Chart: Shows and hides chart-related items (

Chart Layer Settings, page 26

).

My Vessel: Shows and hides items relating to the boat (

My Vessel Layer Settings, page 26

).

User Data: Shows and hides user data, such as waypoints, boundaries, and tracks, and opens user data lists 

(

User Data Layer Settings, page 27

).

Other Vessels: Adjusts how other vessels are shown (

Other Vessels Layer Settings, page 27

).

Water: Shows and hides depth items (

Water Layer Settings, page 28

).

Quickdraw Contours: Shows and hides Garmin Quickdraw Contours data (

Garmin Quickdraw Contours Settings

page 32

).

Chart Layer Settings

From a chart, select MENU > Layers > Chart.
Satellite Photos: Shows high-resolution satellite images on the land or on both land and sea portions of the 

Navigation chart, when certain premium maps are used (

Showing Satellite Imagery on the Navigation Chart

page 20

).

NOTE: This setting must be enabled to view Standard Mapping charts.

Tides & Currents: Shows current station indicators and tide station indicators on the chart and enables the tides 

and current slider, which sets the time for which tides and currents are reported on the map.

Land POIs: Shows points of interest on land.
Navaid: Shows navigational aids, such as ATONs and flashing lights, on the chart. Allows you to select NOAA or 

IALA navaid type.

Service Points: Shows locations for marine services.
Depth: Adjusts the items on the depth layer (

Water Layer Settings, page 28

).

Restricted Areas: Shows information about restricted areas on the chart.
Photo Points: Shows camera icons for aerial photos (

Viewing Aerial Photos of Landmarks, page 21

).

My Vessel Layer Settings

From a chart, select MENU > Layers > My Vessel.
Heading Line: Shows and adjusts the heading line, which is a line drawn on the map from the bow of the boat in 

the direction of travel (

Setting the Heading Line and Angle Markers, page 18

).

Laylines: Adjusts the laylines, when in sailing mode (

Laylines Settings, page 27

).

Roses: Allows you to display roses on the chart. Wind roses show a visual representation of the wind angle 

or direction provided by the connected wind sensor. The compass rose indicates the compass direction 
oriented to the heading of the boat.

Vessel Icon: Sets the icon that represents your present location on the chart.

26

Charts and 3D Chart Views

Summary of Contents for ECHOMAP PLUS

































































































































Reviews: