14 Install the rubber gasket pieces on the back of the device.
The pieces of the rubber gasket have adhesive on the back. Make sure you remove the protective liner before
installing them on the device.
NOTICE
On ECHOMAP UHD2 9 sv models, the top and bottom gasket pieces are not interchangeable and are labeled to
help install correctly. Be sure to use the appropriate gasket pieces on the top and bottom to avoid water ingress
behind the mounting surface.
15 Place the device into the cutout.
16 Secure the device to the mounting surface using the included screws .
17 Install the trim caps by snapping them in place around the edges of the device.
6
