Using Cycling Dynamics
Before you can use cycling dynamics, you must pair the power meter with your device using ANT+ technology
(
Pairing Your Wireless Sensors, page 51
).
NOTE: Recording cycling dynamics uses additional device memory.
1 Go for a ride.
2 Scroll to the cycling dynamics screen to view your power phase data , total power
, and platform center
offset
.
3 If necessary, hold a data field to change it (
).
NOTE: The two data fields at the bottom of the screen can be customized.
You can send the ride to the Garmin Connect app to view additional cycling dynamics data (
).
Power Phase Data
Power phase is the pedal stroke region (between the start crank angle and the end crank angle) where you
produce positive power.
Platform Center Offset
Platform center offset is the location on the pedal platform where you apply force.
Wireless Sensors
53
