Wi
‑
Fi Settings
Select
> Connected Features > Wi-Fi.
Wi-Fi: Enables Wi‑Fi wireless technology.
NOTE: Other Wi‑Fi settings appear only when Wi‑Fi is enabled.
Auto Upload: Allows you to upload activities automatically over a known wireless network.
Add Network: Connects your device to a wireless network.
Wireless Sensors
Your device can be paired and used with wireless ANT+ or Bluetooth sensors (
Pairing Your Wireless Sensors,
). After the devices are paired, you can customize the optional data fields (
). If your device was packaged with a sensor, they are already paired.
For information about specific Garmin sensor compatibility, purchasing, or to view the owner's manual, go to
for that sensor.
Sensor Type
Description
eBike
You can use your device with your eBike and view bike data, such as battery and shifting infor
mation, during your rides.
Extended
Display
You can use the Extended Display mode to display data screens from your Edge device on a
compatible Edge device during a ride or triathlon.
Heart Rate
You can use an external heart rate monitor, such as the HRM-Pro
™
or HRM-Dual
™
, and view
heart rate data during your activities.
inReach
Remote
The inReach
®
remote function allows you to control your inReach device using your Edge
device (
Using the inReach Remote, page 55
).
Lights
You can use Varia
™
smart bike lights to improve situational awareness.
Power
You can use a power meter, such as Rally
™
and Vector
™
, to view your power data on your
device. You can adjust your power zones to match your goals and abilities (
), or use range alerts to be notified when you reach a specified power zone
(
).
Radar
You can use a Varia rearview bike radar to improve situational awareness and send alerts
about approaching vehicles. With a Varia radar camera tail light, you can also take photos and
record video during a ride (
Using the Varia Camera Controls, page 54
).
Shifting
You can use electronic shifters to display shifting information during a ride. The Edge 1040
device displays current adjustment values when the sensor is in adjustment mode.
Shimano Di2
You can use Shimano
®
Di2
™
electronic shifters to display shifting information during a ride. The
Edge 1040 device displays current adjustment values when the sensor is in adjustment mode.
Smart Trainer
You can use your device with an indoor bike smart trainer to simulate resistance while
following a course, ride, or workout (
Using an ANT+ Indoor Trainer, page 15
).
Speed/
Cadence
You can attach speed or cadence sensors to your bike and view the data during your ride. If
necessary, you can manually enter your wheel circumference (
).
VIRB
The VIRB
®
remote function allows you to control your VIRB action camera using your device.
46
Wireless Sensors
