Edge 500 Owner’s Manual
ANT+ Sensors
To turn the non-zero averaging on or
off, press and hold
MENU
, and select
Settings
>
Bike Settings
>
Data Avg
.
replacing the GSC 10
Battery
The GSC 10 contains a user-
replaceable CR2032 battery.
NOTE
: Contact your local waste
disposal department to properly
dispose of batteries.
1. Locate the circular battery cover on
the side of the GSC 10.
Battery
cover
CR0
battery
2. Use a coin to twist the cover
counter-clockwise until it is loose
enough to remove (arrow points to
unlocked).
3.
Remove the cover and battery.
4. Wait 30 seconds.
5. Insert the new battery with the
positive side facing up.
NOTE
: Be careful not to damage
or lose the O-ring gasket on the
cover.
6. Use a coin to twist the cover back
into place (arrow points to locked).
Arrow
Locked
Unlocked
Battery
cover
Summary of Contents for EDGE 500
