8
Press down slightly and turn the Edge device clockwise until
it locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Turning On the Device
The first time you turn on the device, you are prompted to
configure system settings and profiles.
1
Hold .
2
Follow the on-screen instructions.
If your device includes ANT+
®
sensors (such as a heart rate
monitor, speed sensor, or cadence sensor), you can activate
them during configuration.
For more information about ANT+ sensors, see
.
Keys
À
Select to adjust the backlight brightness.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the status page.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the device menu.
Ã
Select to mark a new lap.
Ä
Select to start and stop the timer.
Å
Select to return to the previous screen.
Æ
Select to choose an option or to acknowledge a message.
During a ride, select to view menu options such as alerts
and data fields.
Viewing the Status Page
The status page displays the connection status of the GPS,
ANT+ sensors, and your smartphone.
Select an option:
• From the home screen, select .
• During a ride, select >
Status Page
.
The status page appears. A solid icon means the signal was
found or the sensor is connected.
Using the Backlight
• Select any key to turn on the backlight.
• Select to adjust the backlight brightness.
• From the home screen, select one or more options:
◦ To adjust the brightness, select >
Brightness
>
Brightness
.
◦ To adjust the timeout, select >
Brightness
>
Backlight
Timeout
and select an option.
Using the Shortcut Menu
Shortcut menu options are available for data screens and
accessory features. During a ride,
appears on the data
screens.
Select to view the shortcut menu options.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Training
Going for a Ride
If your device was packaged with an ANT+ sensor, they are
already paired and can be activated during initial setup.
1
Hold to turn on the device.
2
Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3
From the home screen, select .
4
Select an activity profile.
5
Select to start the timer.
2
Training
