Navigating to a Point of Interest
You can search for specific types of locations.
1
From the home screen, select
Where To?
>
Search Tools
>
POI Categories
.
2
Select a category.
3
Select a point of interest.
4
Select
RIDE
.
Setting the Search Location
By default, the device searches for points of interest, saved
locations, and saved routes near your current location. You can
set the device to search near a different location.
1
From the home screen, select
Where To?
> .
2
Select a search area.
3
If necessary, select a location.
4
If necessary, select
Use
.
Saving Your Location
You can save your present location, such as your home or
parking spot.
From the home screen, select >
System
>
GPS
>
Mark
Location
> .
Navigating to an Address
1
From the home screen, select
Where To?
>
Search Tools
>
Addresses
.
2
Follow the on-screen instructions.
3
Select
RIDE
.
Navigating to a Recent Location
1
From the home screen, select
Where To?
>
Recent Finds
.
2
Select a location.
3
Select
RIDE
.
Navigating to a Saved Location
Before you can navigate to a saved photo, you must transfer a
geotagged photo to your device (
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select
RIDE
.
Navigating to a Saved Photo
Before you can navigate to a saved photo, you must transfer a
geotagged photo to your device (
1
From the home screen, select
Where To?
>
Saved
>
Photos
.
2
Select a photo.
3
Select
RIDE
.
Saving Locations from the Map
1
From the home screen, select
View Map
> .
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select > to save the location.
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Project Location
.
5
Enter the bearing and distance to the projected location.
6
Select .
Editing Locations
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select .
5
Select an attribute.
For example, select
Change Elevation
to enter a known
altitude for the location.
6
Enter the new information, and select .
Deleting a Location
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Delete Location
> .
Creating a Course from History
You can create a new course from a previously saved ride.
1
From the home screen, select >
Rides
.
2
Select a ride.
3
Select .
4
Enter a name for the course, and select .
Riding a Saved Course
Before you can ride a saved course, you must record a ride
(
) and create a course from the ride (
1
From the home screen, select
Where To?
>
Saved
>
Courses
.
2
Select a course.
3
Select
RIDE
.
Editing the Course Settings
1
From the home screen, select
Where To?
>
Saved
>
Courses
.
2
Select a course.
3
Select
Settings
.
4
Select an option:
• To change the name of the course, select
Name
.
• To set the device to warn you when you have left the
route, select
Off Course Warnings
.
Stopping Navigation
From the map page, select .
ANT+™ Sensors
The Edge Touring Plus can be used with a wireless ANT+ heart
rate monitor or ANT+ enabled eBike.
Pairing a Heart Rate Monitor
Before you can pair, you must put on the heart rate monitor.
1
Bring the device within range (3 m) of the heart rate monitor.
NOTE:
Stay 10 m away from other ANT+ sensors while
pairing.
2
Select >
Heart Rate Monitor
>
Enable
>
Search
.
ANT+™ Sensors
3
