8
owner’s manual for use with models 10, 20, 30
Waypoints, Routes, and Tracks
EN
Increasing the Accuracy of a
Waypoint Location
Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple
samples of the waypoint location.
1. Select Waypoint Averaging.
2. Select a waypoint.
3. Move to the location.
4. Select Start.
5. When the Sample Confidence
status bar reaches 100%, select
Save.
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes
between samples.
Using Sight ‘N Go
Sight ‘N Go is available on the
eTrex 30.
You can point the device at an
object in the distance, lock in the
direction, and then navigate to the
object.
1. Select Sight ‘N Go.
2. Point the device at an object or
in the direction of a location.
3. Select Lock Direction >
Project Waypoint.
4. Select a unit of measure.
5. Enter the distance to the object,
and select Done > Save.
Summary of Contents for eTrex 10
