•
Regardless of the screen you are
on, push in and hold toggle
(legend) or enter button (HC)
“Mark Waypoint” screen will
pop-up:
How to Add a Waypoint by Entering Coordinates
1)
Toggle until the numbers within the flag are highlighted, then
push toggle in. Name point then select ‘OK’.
2)
Toggle until the field next to ‘Location’ is highlighted, push
toggle in. Move highlight box off of ‘N’ so box is on 1st number.
Enter the desired N coordinates (Latitude), enter W
coordinates (Longitude) on next line. Click ‘OK’ when done.
- This screen shows decimal degrees. Screen will look slightly
different for other coordinate systems but apply same steps.
3)
After the point name and coordinates are entered, click ‘OK’ on
the main screen to save the waypoint.
