54
Reference
To Select an operating mode:
1. With the MENU Page displayed, highlight ‘SETUP’ and
press
ENTER
. The SETUP Page appears.
2. Using the
UP
or
DOWN
Button highlight ‘SYSTEM’
and press
ENTER
. The SYSTEM Page appears.
3. Using the
UP
or
DOWN
Button highlight the ‘GPS’
fi eld and press
ENTER
. The Option List will appear.
4. Using the
UP
or
DOWN
Button highlight the desired
mode and press
ENTER
.
Compass
The eTrex Summit will allow you to turn the Elec-
tronic Compass on and off. Turning the compass off when
not needed will help conserve battery power.
Turning the compass On/Off:
1. With the MENU Page displayed highlight ‘SETUP’ and
press
ENTER
. The SETUP Page appears.
2. Using the
UP
or
DOWN
Button, highlight ‘SYSTEM’
and press
ENTER
. The SYSTEM Page appears.
3. Using the
UP
or
DOWN
Button, highlight the ‘COM-
PASS’ fi eld and press
ENTER
.
4. Using the
UP
or
DOWN
Button, highlight the desired
mode and press
ENTER
.
Altimeter
The Altimeter can use GPS altitude to perform an
automatic calibration. While this is not as accurate as
the calibration procedure described on page 42, it can be
useful in the event that you do not know your current
elevation or the barometric pressure.
Turning ‘AUTO CAL’ On/Off:
1. With the MENU Page displayed highlight ‘SETUP’ and
press
ENTER
. The SETUP Page appears.
2. Using the
UP
or
DOWN
Button, highlight ‘SYSTEM’
and press
ENTER
. The SYSTEM Page appears.
3. Using the
UP
or
DOWN
Button, highlight the ‘ALTIM-
ETER’ fi eld and press
ENTER
.
4. Using the
UP
or
DOWN
Button highlight the desired
mode and press
ENTER
.
Press and hold the
PAGE
key
to activate the compass and
display the Pointer Page
Auto Calibrate
System Page
190-00193-00_0D.indd
02/12/01, 10:09 AM
54