41
The Setup Page
You can choose from
eight time zones plus
‘other’.
Calibration
Reference
7.
If you selected ‘NO’
—and you are tracking
satellites, you will be asked ‘DO YOU WANT TO USE
CURRENT GPS ALTITUDE’. If you do highlight ‘YES’
and press
ENTER
. A message ‘CALIBRATION
COMPLETED SUCCESSFULLY’ will be displayed.
Highlight ‘OK’ and press
ENTER
. If you don’t
highlight ‘NO’ and press
ENTER
. You will be
prompted that ‘YOU DO NOT HAVE ENOUGH
INFORMATION’ and referred to this manual.
Highlight ‘OK’ and press
ENTER
to return to the
‘MENU’ Page..
Setup Page
The Setup Page allows you to customize the eTrex
Summit. On the Setup Page you can change coordinate
systems, map datums, and distance units. You can also
change the time format, north reference, operating mode,
display contrast, and display back light timeout.
Time Format
The ‘Time’ Page allows you to select a 12 hour or 24
hour time format, enter the proper time zone, and choose
Daylight Savings Time. When you select 12 hour time
formatting, the clock will read like a standard clock with
12 hour AM and 12 hour PM cycles. The 24 hour option
sets the eTrex Summit to display a 24 hour cycle (Military
Time).
To change the time format:
1. Press the
PAGE
Button and switch to the ‘MENU’
Page. Press the
UP
or
DOWN
Button and highlight
‘SETUP’. Press
ENTER
. The ‘SETUP’ Page appears.
2. Press the
UP
or
DOWN
Button and highlight ‘TIME’
and press
ENTER
.
3. Press the
UP
or
DOWN
Button and select the ‘TIME
FORMAT’ field and press
ENTER
.
4. Press the
UP
or
DOWN
Button, select 12 or 24
hours and press
ENTER
. Press
PAGE
to get back to
the page of your choice.
UA-1005.043