43
Display Page
The Display Page allows you to set the display
backlight timeout (on all the time, 15 or 30 seconds, and
1 or 2 minutes) and the display contrast.
To change the Light Timeout:
1. Press the
PAGE
Button and switch to the ‘MENU’
Page. Press the
UP
or
DOWN
Button and highlight
‘SETUP’. Press
ENTER
. The ‘SETUP’ Page appears.
2. Press the
UP
or
DOWN
Button and highlight
‘DISPLAY’ and press
ENTER
. Press
ENTER
on the
‘LIGHT TIMEOUT’ field.
3. Press the
UP
or
DOWN
Button and highlight your
selection and press
ENTER
. Press
PAGE
to get back
to the ‘SETUP’ page.
To adjust the display contrast:
1. Press the
PAGE
Button and switch to the ‘MENU’
Page. Press the
UP
or
DOWN
Button and highlight
‘SETUP’. Press
ENTER
. The ‘SETUP’ Page appears.
2. Press the
UP
or
DOWN
Button and highlight
‘DISPLAY’ and press
ENTER
. Press the
UP
or
DOWN
Button and highlight the ‘CONTRAST’ icon
and press
ENTER
.
3. Press the
UP
or
DOWN
Button and adjust the
contrast and
ENTER
. Press
PAGE
to get back to
the ‘SETUP’ page.
Units Page
Using your eTrex Summit with a paper map increases
the navigation power of both. If you are going to use a
map in conjunction with the eTrex Summit, you must
select the position format (grid), map datum, map units,
and north reference to match the map’s units. This is the
purpose of the Units Page. Regarding position format, the
eTrex Summit allows you to choose from more than
thirteen different grids. The eTrex Summit supports the
UTM/UPS and latitude/longitude grids because together
they cover the world.
Display and
Units Pages
You can set the backlight
to stay on all the time, but
watch your battery
power!
The Units Page allows you
match the units of the eTrex
Summit to the units of a
unique paper map you may
be using.
Reference
UA-1005.045