38
Customizing Your Device
the field.
•
Select
Reorder
to change the location of the
data screen in the loop.
•
Select
Remove
to remove the data screen from
the loop.
8
If necessary, select
Add New
to add a data screen
to the loop.
You can add a custom data screen, or select one of
the predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an
activity.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select the activity to customize.
4
Select the activity settings.
5
Select
Data Screens
>
Add New
>
Map
.
Alerts
You can set alerts for each activity, which can help
you to train toward specific goals, to increase your
awareness of your environment, and to navigate to
your destination. Some alerts are available only for
specific activities. There are three types of alerts:
event alerts, range alerts, and recurring alerts.
Event alert:
An event alert notifies you once. The event
is a specific value. For example, you can set the
device to alert you when you reach a specified
elevation.
Range alert:
A range alert notifies you each time the
device is above or below a specified range of
values. For example, you can set the device to alert
you when your heart rate is below 60 beats per
minute (bpm) and over 210 bpm.
Recurring alert:
A recurring alert notifies you each time
the device records a specified value or interval. For
example, you can set the device to alert you every
30 minutes.
Alert Name Alert Type
Description
Cadence
Range
You can set minimum and
maximum cadence values.
Calories
Event,
recurring
You can set the number of
calories.
Custom
Event,
recurring
You can select an existing
message or create a
custom message and
select an alert type.
Distance
Recurring
You can set a distance
interval.
Elevation
Range
You can set minimum and
maximum elevation values.
Heart Rate Range
You can set minimum and
maximum heart rate values
or select zone changes. See
.
Pace
Range
You can set minimum and
maximum pace values.
Power
Range
You can set the high or low
power level.
Proximity
Event
You can set a radius from a
saved location.
Run/Walk
Recurring
You can set timed walking
breaks at regular intervals.
Speed
Range
You can set minimum and
maximum speed values.
Stroke Rate Range
You can set high or low
strokes per minute.
Time
Event,
recurring
You can set a time interval.
Setting an Alert
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select the activity settings.
5
Select
Alerts
.
6
Select an option:
•
Select
Add New
to add a new alert for the
activity.
•
Select the alert name to edit an existing alert.
7
If necessary, select the type of alert.
8
Select a zone, enter the minimum and maximum
values, or enter a custom value for the alert.
9
If necessary, turn on the alert.
For event and recurring alerts, a message appears
each time you reach the alert value. For range alerts, a
message appears each time you exceed or drop below
the specified range (minimum and maximum values).
Activity Map Settings
You can customize the appearance of the map data
screen for each activity.
Hold
MENU
, select
Activities & Apps
, select an activity,
select the activity settings, and select
Map
.
Configure Maps:
Shows or hides data from installed
map products.
Map Theme:
Sets the map to display data optimized
for your activity type. The System option uses the
preferences from the system map settings (
Use Sys� Settings:
Enables the device to use the
preferences from the system map settings.