Customizing Your Device
43
Customizing the My Day Widget
You can customize the list of metrics displayed on the
My Day widget.
1
From the watch face, press
UP
or
DOWN
to view
the
My Day
widget.
2
Hold
MENU
.
3
Select
Options
.
4
Select the toggle switches to show or hide each
metric.
Customizing the Controls Menu
You can add, remove, and change the order of the
shortcut menu options in the controls menu (
).
1
Hold
MENU
.
2
Select
Controls
.
3
Select a shortcut to customize.
4
Select an option:
•
Select
Reorder
to change the location of the
shortcut in the controls menu.
•
Select
Remove
to remove the shortcut from the
controls menu.
5
If necessary, select
Add New
to add an additional
shortcut to the controls menu.
Watch Face Settings
You can customize the appearance of the watch face
by selecting the layout, colors, and additional data.
You can also download custom watch faces from the
Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you
must install a watch face from the Connect IQ store
(
).
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch
face.
1
From the watch face, hold
MENU
.
2
Select
Watch Face
.
3
Press
UP
or
DOWN
to preview the watch face
options.
4
Select
Add New
to scroll through additional pre-
loaded watch faces.
5
Select
>
Apply
to activate a pre-loaded watch
face or an installed Connect IQ watch face.
6
If using a pre-loaded watch face, select
>
Customize
.
7
Select an option:
• To change the style of the numbers for the
analog watch face, select
Dial
.
• To change the sport for the gauges on the
performance watch face, select
Select Sport
.
• To change the style of the hands for the analog
watch face, select
Hands
.
• To change the style of the numbers for the
digital watch face, select
Layout
.
• To change the style of the seconds for the
digital watch face, select
Seconds
.
• To change the data that appears on the watch
face, select
Data
.
• To add or change an accent color for the watch
face, select
Accent Color
.
• To change the background color, select
Bkgd�
Color
.
• To save the changes, select
Done
.
Sensors Settings
Compass Settings
Hold
MENU
, and select
Sensors & Accessories
>
Compass
.
Calibrate:
Allows you to manually calibrate the
Calibrating the Compass Manually,
Display:
Sets the directional heading on the compass
to letters, degrees, or milliradians.
North Ref�:
Sets the north reference of the compass
(
Setting the North Reference, page 43
Mode:
Sets the compass to use electronic-sensor data
only (On), a combination of GPS and electronic-
sensor data when moving (Auto), or GPS data only
(Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To
improve heading accuracy, do not stand near objects
that influence magnetic fields, such as vehicles,
buildings, and overhead power lines.
Your device was already calibrated at the factory,
and the device uses automatic calibration by default.
If you experience irregular compass behavior, for
example, after moving long distances or after extreme
temperature changes, you can manually calibrate the
compass.
1
Hold
MENU
.
2
Select
Sensors & Accessories
>
Compass
>
Calibrate
>
Start
.
3
Follow the on-screen instructions.
TIP:
Move your wrist in a small figure eight motion
until a message appears.
Setting the North Reference
You can set the directional reference used in
calculating heading information.
1
Hold
MENU
.
2
Select
Sensors & Accessories
>
Compass
>
North
Ref�
.
3
Select an option:
