190-00917-00 Rev. A
Garmin GMA 240 Pilot’s Guide
11
GMA 240 Audio Panel
GMA 240 PrOGrAMMING OPTIONs
Programming options include variable configurations that can be
arranged by a Garmin authorized service center. Some options include a
Pilot operable pushbutton or toggle switch or might be fixed configurations
that are unchangeable. Configurations include the following:
•
COM Swap
- A remote mounted pushbutton is used to transfer the active
microphone between COM1 MIC and COM2 MIC.
•
COM muting on transmit
- Audio on the other selected radios is muted
while the active transceiver is transmitting.
•
Deactivate MASQ
TM
(master avionics squelch). Enables/disables master
squelch. The threshold level of MASQ
TM
is also adjustable.
•
Internal Sidetone
- Enables/disables internal sidetone for radios that
do not provide sidetone during transmission. This can be selected
independently for COM1, COM2, and TEL.
•
Crew Isolation
- ICS isolation for the crew in place of Pilot isolation.
•
PILOT ISO Music
- Enable music audio to be heard by the Pilot during
PILOT ISO mode.
•
Button Press Tone
- Enable beep tone annunciation of button presses.
•
Alert Music Mute
- Disable music interruption by alert audio. Default
operation is recommended.
•
Jack TEL detect
- Phone detection is bypassed. Audio panel assumes a
telephone is plugged into the jack whenever the
TEL
Key is selected.
•
Music mute by primary COM only
- When
RADIO
Key is selected,
music is muted only when active COM is receiving audio.
•
Enable Keyed ICS
- Intercom MIC audio heard only when the
corresponding
ICS
Key for the MIC position is pressed.
•
Individual volume controls
- The volume can be adjusted individually
for each alert input, the rear connector pin TEL audio input, and the front
accessory jack TEL audio input.
Summary of Contents for Fishfinder 240 Blue
Page 1: ...GMA 240 Pilot s Guide...
