3
Select Pan/Zoom.
4
Select an option:
•
To toggle between panning up and
down, panning left and right, or
zooming, select START.
•
To pan or zoom the map, select UP and DOWN.
•
To quit, select BACK.
Map Settings
You can customize how the map appears in
the map app and data screens.
From the watch face, hold UP, and select Settings >
Map.
Orientation: Sets the orientation of the map. The
North Up option shows north at the top of the
screen.
The Track Up option shows your current
direction of travel at the top of the screen.
User Locations: Shows or hides saved locations
on the map.
Auto Zoom: Automatically selects the zoom level
for optimal use of your map. When disabled,
you must zoom in or out manually.
Wireless Sensors
Your device can be used with wireless ANT+ or
Bluetooth sensors. For more information about
compatibility and purchasing optional sensors, go
to
Pairing Your Wireless Sensors
The first time you connect a wireless sensor to your
device using ANT+ or Bluetooth technology, you
must pair the device and sensor. After they are
paired, the device connects to the sensor
automatically when you start an activity and the
sensor is active and within range.
1
If you are pairing a heart rate monitor, put on
the heart rate monitor.
The heart rate monitor does not send or
receive data until you put it on.
2
Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless
sensors while pairing.
3
Hold UP.
4
Select Settings > Sensors & Accessories >
Add New.
5
Select an option:
•
Select Search All.
•
Select your sensor type.
After the sensor is paired with your device,
the sensor status changes from Searching to
Connected. Sensor data appears in the data screen
loop or a custom data field.
Wireless Sensors
27
Summary of Contents for FORERUNNER 245
